575455
9
Zoom out
Zoom in
Previous page
1/14
Next page
- 7 -
Risk of personal injury!
Never take hold of the frying basket 3 directly after
frying. It is very hot! Lift the frying basket 3 out of
the fryer ONLY by the handle!
Carefully lift the frying basket 3 out of the deep
fryer. If necessary, shake off any excess oil or fat
over the deep fryer.
Tip the fried food into a bowl or a sieve (lined
with absorbent kitchen paper!)
If you do not use the deep fryer regularly it is re-
commended that, after cooling, the oil or liquified
fat is poured into a well sealed container and stored in
the refrigerator or a cool storeroom. Fill the contai-
ner through a sieve, in order to remove any food
particles from the oil or fat. Solid fats must still be in
a liquid state so that they can be poured.
Changing the frying oil or fat
Change the oil first when it has completely cooled
down. Solid fats must still be in a liquid state so that
they can be poured.
Open the appliance lid.
Remove the frying basket 3.
Remove the operating/heating element 5.
Place the operating/heating element 5 at a
clean and dry location.
Carefully remove the stainless steel container
4 with the oil or fat from the deep fryer.
Pour the oil or fat into suitable containers, for
example bottles. For this, use the pouring runnel
at the corner of the stainless steel container 4.
Note:
The disposal of cooking oils and fats is regulated
differently in every community or town. Frequently,
it is not permitted to dispose of such oils or fats with
normal household refuse. Make enquiries at your
local community administration office about suitable
disposal sites.
Thoroughly clean all parts of the deep fryer,
as described in the Chapter "Cleaning".
Refill the deep fryer with fresh oil or fat, as de-
scribed in the Chapter „Frying“.
Cleaning and Care
Danger!
Remove the power cable from the wall socket before
cleaning. There is a risk of receiving an electric shock!
Danger!
Allow the deep fryer to cool down. Otherwise you
risk being burnt!
NEVER submerse the control and heating ele-
ment 5, the power cable and plug or the ap-
pliance housing under water and NEVER clean
them under running water! This could irrepar-
ably damage the appliance. If required, clean
this element with a moist cloth.
Attention! Appliance Damage!
When cleaning the components do not use aggres-
sive or abrasive cleaning agents or materials such
as scouring milk or steel wool. These could damage
the upper surfaces of the appliance!
To simplify cleaning, completely dismantle the deep
fryer:
1. Open the appliance lid and remove it by pulling
it upwards.
2. Pull the handle upwards until it audibly engages.
Remove the frying basket 3.
3. Pull the operating/heating element 5 upwards
from the guiding rails. Place the operating/heating
element 5 at a clean and dry location.
4. Take out the stainless steel container 4 and re-
move the fat or oil
IB_63853_SKF2300A1_LB6 16.02.2011 9:17 Uhr Seite 7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 A1 - IAN 63853 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 A1 - IAN 63853 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKF 2300 A1 - IAN 63853

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - German - 41 pages

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - German - 42 pages

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - Dutch, French - 41 pages

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - French, Italian - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info