575455
4
Zoom out
Zoom in
Previous page
1/14
Next page
- 2 -
Cool-Zone
Deep Fat Fryer
Intended Usage
The deep fryer is intended for use in private house-
holds, for frying foodstuffs. It is not intended for use
in commercial or industrial environments.
Safety instructions
Risk of electrical shocks.
Connect the appliance to a mains power socket
delivering a voltage of 230 V
~
50/60 Hz.
Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
Ensure that the power cable never becomes wet
or moist during operation.
Never submerge the operating/heating element
and the housing with the power cable in water,
and do not clean these components under
running water.
Risk of fire!
Do not use the appliance in the vicinity of hot
surfaces.
Do not leave the appliance unattended when in
use.
Do not use an external timing switch or a separate
remote control system to operate the appliance.
NEVER melt solid fat (fat in blocks) in the deep
fryer. The heating element may be damaged
by the high temperature and there is a risk of
fire! Melt the fat beforehand in a saucepan or si-
milar.
NEVER use water to extinguish the
fire!
Old or dirty fats and oils can spontaneously ignite
themselves if overheated. Change the oils or fats
in good time. In case of fire, remove the power
plug from the wall and smother the burning fat
or oil with a damp towel or fire blanket.
Risk of personal injury!
This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
Children should be supervised to ensure that
they do not play with the appliance.
Ensure that the appliance stands with a safe and
secure positioning.
Do not operate the appliance if it has sustained
a fall or is damaged. Arrange for the appliance
to be checked and, if necessary, repaired by
qualified technicians.
During the frying process hot steam is generated,
especially when the lid is open. Keep a safe
distance away from the steam.
Ensure that all parts are completely dry before
pouring oil or liquid fat into the deep fryer.
Otherwise, hot oil or fat could splatter out.
Carefully pat all foodstuffs dry before placing
them in the deep fryer. Otherwise, hot oil or fat
could splatter out.
Be especially careful with frozen foodstuffs.
Remove all ice particles. The more ice there is
on the foodstuff, the more the hot oil or fat will
splatter.
Some parts of the appliance become very hot
during operation. Touching these may cause
serious burns.
IB_63853_SKF2300A1_LB6 16.02.2011 9:17 Uhr Seite 2
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 A1 - IAN 63853 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 A1 - IAN 63853 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKF 2300 A1 - IAN 63853

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - German - 41 pages

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - German - 42 pages

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - Dutch, French - 41 pages

Silvercrest SKF 2300 A1 - IAN 63853 User Manual - French, Italian - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info