537063

Silvercrest SKD 1000 A1 Manual

26
Zoom out
Zoom in
Previous page
1/83
Next page
Cassette Digitizer SilverCrest SKD 1000 A1
Troubleshooting
You can solve most common problems yourself using the table below. If the
problem persists after checking the suggested solutions, please contact our
Service Hotline (see page 28). Do not attempt to repair the product yourself.
The cassette digitizer can’t be switched on
Insert the batteries with the correct polarity.
Replace the batteries.
If you are using an optional mains adapter, connect the adapter firmly to the
DC input (1) of the device and to a properly-functioning power socket. Make
sure that the small round connector of the mains adapter has the correct
polarity ( ) and that the mains adapter outputs 3 V DC.
No sound
Are you sure the inserted cassette contains recordings?
Is the volume set to very low?
Problems when copying cassette content to a computer
Please check that the USB cable is properly connected.
Make sure that the USB cable is not damaged.
Make sure that the correct recording console is configured in the AudioLava
software. Select "Options", then "Device Settings", and in "Recording Console"
select the "[MME] Microphone Array (USB PnP Audio)" option. Under Windows
XP this entry reads "MME (USB PnP Audio Device)".
If the input level does not rise above –50 dB in the AudioLava recording (see
the level meters in the "Import" tab), either the cassette is empty, or you have
forgotten to start playback on the SilverCrest SKD 1000 A1, or the volume has
been turned right down on the device. You may also have inadvertently turned
the volume down in Windows for the recording device. Click on "Start", "Control
Panel", "Hardware and Sound", "Manage Audio Devices", and in the “Sound”
window which is then displayed open the "Recording" tab. Select the
24 English
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKD 1000 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKD 1000 A1 in the language / languages: English, Danish, Swedish, Finnish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKD 1000 A1

Silvercrest SKD 1000 A1 User Manual - German, Dutch, French, Italian - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info