Manual Silvercrest SKD 1000 A1 (page 13 of 83) (English, Danish, Swedish, Finnish)

537063

Zoom out

Zoom in

1/83

Cassette Digitizer SilverCrest SKD 1000 A1

Preparing the Cassette Digitizer

You can operate the device using the supplied AA-sized (Mignon) batteries, via the

USB cable connected to a PC, or by using an optional mains adapter (not

supplied). The mains adapter must have a compatible DC output plug and must

supply an operating voltage of 3V. Mains adapter output polarity:

Inserting the Batteries

The battery compartment (13) is located underneath the cassette compartment

cover (12).

1. Slide the black release button (5) in the direction indicated by the arrow to

release the cassette compartment cover, and then raise the cover.

2. Insert your fingernail into the recess above the cover of the battery

compartment (13) and open the cover. Remove the cover and put it to one

side.

3. Insert the supplied AA batteries into the unit with the correct polarity (+ and -).

Push the first battery as far as you can to the left so that it is no longer visible,

and then insert the second battery (see the diagram to the left of the battery

compartment).

4. Replace the cover on the battery compartment. First position its lower edge on

the two lugs at the bottom left and right of the battery compartment, and then

carefully press down the top edge of the cover with your finger until it clicks into

place.

If the volume level drops, or if the device stops operating or the

playback becomes distorted, replace the batteries with new batteries

of the same type. The device does not provide an indication that the

batteries are weak.

English 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKD 1000 A1 in the language / languages: English, Danish, Swedish, Finnish as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKD 1000 A1

Silvercrest SKD 1000 A1 User Manual - German, Dutch, French, Italian - 115 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKD 1000 A1 Manual

Product: