654496

Silvercrest SIKP2000D1 - IAN 273185 Manual

84
Zoom out
Zoom in
Previous page
1/92
Next page
SilverCrest SIKP 2000 D1
82 - English
Getting started
Setup and connection
Place the device on an even, non-slip and dry surface.
Risk of fire!
Do not place the device on textile surfaces such as a tablecloth.
Do not place the device unit on metal surfaces. These can heat up quickly and cause a
fire.
Never place the device under flammable items such as curtains.
The openings on the bottom of the product must never be covered. Keep a distance of at
least 10 cm clear all around the device and at least 60 cm clear above it to guarantee
sufficient cooling.
Use
If you switch the induction hotplate off and the surface temperature of the heating zone is
higher than 60 °C, "H" is shown on the display. If the temperature drops below 60 °C,
the display shows "L".
If you remove the pan from the induction hotplate when in use and the surface
temperature of the heating zone is greater than 60 °C, the display shows "H-EO" and a
beeper sounds every 4 seconds. After around 45 seconds, the beeper stops and only
"H" is displayed. About a minute later, the device switches itself off. The display continues
to show "H" as long as the surface temperature of the hotplate is greater than 60 °C. If
the temperature drops below 60 °C, the display shows "L".
When the hotplate is switched on, the preset power level is 1000 W.
1. Connect the hotplate to a live wall socket using the power cord (1). A beeper then sounds and the
display (7) shows "L" or "H" depending on the temperature.
2. Place a pan on the hotplate (2).
Warning about property damage
The pan must be explicitly suitable for induction hotplates. Do not use any other pans
(e.g. ceramic ones).
Be careful when preparing soups and stews. The weight of the cooking vessel and the
contents together must not exceed 10 kg.
… 84 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SIKP2000D1 - IAN 273185 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP2000D1 - IAN 273185 in the language / languages: French, Italian as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SIKP2000D1 - IAN 273185

Silvercrest SIKP2000D1 - IAN 273185 User Manual - English, German, Dutch, Danish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info