654501
43
Zoom out
Zoom in
Previous page
1/45
Next page
41
SIKP 2000 B2
GB
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE SOLU-
TIONS
The appliance does not
function. The control lamp
“Power 4 does not glow.
The plug 2 is not connected.
Connect the appliance to a
mains power socket.
The appliance is damaged.
In this case, contact Custo-
mer Services.
The appliance does not
start the cooking process.
There is no cookware on the
cooking area 1.
Place suitable cookware
on the cooking area 1.
The cookware is not suitable
for induction cooking areas.
Use suitable cookware
(see chapter "Suitable
Cookware")
Shown in the display 8
is E01.
The appliance is not being
supplied with enough voltage
(< 160 V)..
Check and ensure that the
appliance is connected to
a properly installed mains
power socket with
220 - 240 V
~
, 50 Hz.
Shown in the display 8
is E02.
The appliance is being sup-
plied with too much voltage
(> 270 V).
Check and ensure that the
appliance is connected to
a properly installed mains
power socket with
220 - 240 V
~
, 50 Hz.
Shown in the display 8
is E03.
There is a short circuit inside
the appliance!
Immediately disconnect
the plug 2 from the mains
power socket and contact
the Customer Services
department!
Shown in the display 8
is E05.
The appliance is too hot (in
power levels mode)!
Disconnect the plug 2
from the mains power
socket and wait until the
appliance has cooled
down.
Shown in the display 8
is E06.
The temperature sensor under-
neath the cooking area 1 is
defective or there is a short
circuit..
Disconnect the plug 2
from the mains power
socket and contact the Cus-
tomer Services department.
Shown in the display 8
is E07.
The appliance is too hot
(in Temperature-Mode)!
Disconnect the plug 2
from the mains power
socket and wait until the
appliance has cooled
down.
IB_74434_SIKP2000B2_LB1.indb Abs2:41IB_74434_SIKP2000B2_LB1.indb Abs2:41 10.05.12 13:5410.05.12 13:54
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SIKP2000B2 - IAN 74434 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP2000B2 - IAN 74434 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SIKP2000B2 - IAN 74434

Silvercrest SIKP2000B2 - IAN 74434 User Manual - French - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info