575465
79
Zoom out
Zoom in
Previous page
1/81
Next page
77
SKIP 3400 A1
GB
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE
SOLUTIONS
The appliance does not
function. The control lamp
On
/ Standby r does not
glow.
The plug is not connected.
Connect the appliance to
a mains power socket.
The appliance is damaged.
In this case, contact
Customer Services.
The appliance does not
start the cooking process.
There is no cookware on
the respective cooking area
1 2 4.
Place suitable cookware on
the cooking area 1 2 4.
The cookware is not suitable
for induction cooking areas.
Use suitable cookware
(see chapter "Suitable
Cookware").
E01 appears in one of the
displays.
The appliance is not being
supplied with enough voltage
(< 160 V).
Check to ensure that the
appliance is connected to
a properly installed mains
power socket supplying
220 - 240 V
~
, 50 Hz.
E02 appears in one of the
displays.
The appliance is being
supplied with too much
voltage (> 270 V).
Check to ensure that the
appliance is connected to
a properly installed mains
power socket supplying
220 - 240 V
~
, 50 Hz.
E03 appears in one of the
displays.
There is a short circuit inside
the appliance!
Immediately disconnect the
plug from the mains power
socket and contact the Cus-
tomer Services department!
E05 appears in one of the
displays.
The appliance is too hot
(in power levels mode)!
Disconnect the plug from
the mains power socket
and wait until the appliance
has cooled down.
E06 appears in one of the
displays.
The temperature sensor under-
neath the cooking area 1 2
4 is defective or there is a
short circuit..
Disconnect the plug from
the mains power socket
and contact the Customer
Services department.
E07 appears in one of the
displays.
The appliance is too hot
(in Temperature-Mode)!
Disconnect the plug from
the mains power socket
and wait until the appliance
has cooled down.
IB_75467_SIKP3400A1_LB2.indb Abs2:77IB_75467_SIKP3400A1_LB2.indb Abs2:77 11.07.12 13:2811.07.12 13:28
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SIKP 3400 A1 - IAN 75467 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP 3400 A1 - IAN 75467 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info