Manual Silvercrest SIKP 2000 C1 - IAN 113371 (page 47 of 54) (English, German, Dutch, French)

611269

Zoom out

Zoom in

1/54

9.3 Switching off

• Touch the symbol on/off |5, to switch

off the appliance. An acoustic signal

sounds. The symbol -H- is shown in the

display, as the temperature of the cook-

ing zone is more than 60 °C. The cool-

ing fan carries on cooling the appliance

after it has been switched off.

• The appliance automatically stops the

heat output if the cooking vessel is re-

moved from the cooking zone|2 during

the heating phase. The error message

E|1 is shown in the display and an

acoustic signal sounds. If you do not

place the cooking vessel on the hot

place within approx. 10 seconds, the

appliance switches off. The cooling fan

carries on cooling the appliance after it

has been switched off.

• After 120 minutes without a change in

setting, the appliance switches off auto-

matically. The cooling fan carries on

cooling the appliance after it has been

switched off.

9.4 Switching off with a

timer

1. Touch the symbol |

during operation.

The control light|

lights up,

min

ap-

pears above the display and on the dis-

play the chosen switch-off time appears

in minutes (presetting:

minutes, the de-

vice remains on).

Change the switch-off time by touching

the symbol |

in one-minute steps and

by touching the symbol |

in 10-min-

ute steps. If you

have set the chosen time

and touch no further symbols, the timer

starts automatically and the display

switches over to W or °C again. At

short intervals, the remaining time is dis-

played together with min.

NOTE:

first the button |

must be pressed

once before the switch-off time can be re-

duced in one minute steps by pressing the but-

ton |

3. After the preset time has elapsed, the

appliance switches off. An acoustic sig-

nal sounds. The symbol -H- is shown in

the display, as the temperature of the

cooking zone is more than 60 °C. The

cooling fan carries on cooling the appli-

ance after it has been switched off.

9.5 Child safety lock

To prevent unwanted alteration of the set-

tings, the appliance is equipped with a child

safety lock.

NOTE: if the child safety lock is activated

while in operation, the symbols child safety

lock |6 and on/off |5 are not blocked

and you can switch the device off. You will

only be able to switch the device on, once

the child safety lock has been deactivated.

• Touch the symbol child safety lock |6.

The control light for the child safety

lock|3 lights up and an acoustic signal

sounds. All symbols except the child

safety lock |6 are now blocked.

• Touch the symbol child safety lock |6

for at least 4 seconds to override the

child safety lock. An acoustic signal

sounds and the control light for the child

safety lock|3 goes out. The symbols are

no longer blocked.

BB53B,QGXNWLRQVNRFKSODWWHB%ERRN6HLWH'RQQHUVWDJ-XQL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP 2000 C1 - IAN 113371 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SIKP 2000 C1 - IAN 113371 Manual

Product: