679433
10
Zoom out
Zoom in
Previous page
1/40
Next page
SHSS 16 A1
GB
IE
NI
CY
 7
Operation
ATTENTION! PROPERTY DAMAGE!
The suction opening must always be open
and may not be blocked. Blockages lead to
overheating and damage to the motor.
Do not vacuum shag pile carpet with the floor
nozzle. The rotary brush 0 can get caught in
the carpet and block!
NOTE
Make sure that the HEPA filter and the
coarse filter are always inserted before
using the appliance.
As soon as the suction power of the appliance
begins to diminish noticeably and the charge
indicator lamp flashes green, connect the
appliance to the charger ,.
Using the hand element with the
handle
1) Insert the hand element into the hand
element recess . as described in the chapter
"Assembly/disassembly".
2) Fold out the grip - on the handle by pressing
the release button
3 and, at the same time,
pulling the grip - upwards.
3) Switch on the appliance using the On/Off
switch
. The charge indicator lamp
lights up green, the LED light 6 on the floor
nozzle lights up and the rotary brush 0 starts
turning.
NOTE
Press the ECO button to switch to the
energy-saving ECO mode. The appliance
now uses a lower suction power but can run
for longer.
Press the ECO button again to work at full
suction power.
4) Guide the floor nozzle over the area to be
vacuumed. Hold the grip - so that the floor
nozzle moves smoothly over the floor.
5) Press the On/Off switch
when you have
finished vacuuming. The rotary brush 0 stops,
the charge indicator lamp and the LED
light 6 go out.
Using the hand element
1) Remove the hand element from the hand
element recess . as described in the chapter
"Assembly/disassembly".
2) If required, you can attach the crevice tool
%, the brush attachment 1 or the upholstery
nozzle +.
3) Press the On/Off switch
on the hand
element to start vacuuming the desired
areas. The charge indicator lamp lights
up during operation.
4) When you are finished vacuuming, press the
On/Off switch again. The charge
indicator lamp goes out.
Cleaning and maintenance
WARNING! RISK OF INJURY!
Always unplug the charger , from the
mains. Pull the barrel plug out of the
charging socket " on the cradle # before
cleaning the cradle #.
Always remove the hand element from the
hand element recess .on the handle before
cleaning
-- the hand element ,
-- the handle or
-- the rotary brush 0.
ATTENTION! PROPERTY DAMAGE!
Do not use abrasive or aggressive cleaning
materials. These can damage the surface of
the appliance!
NOTE
The LED light 6 is maintenance-free.
The LEDs cannot be changed!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHSS 16 A1 - IAN 304415 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHSS 16 A1 - IAN 304415 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SHSS 16 A1 - IAN 304415

Silvercrest SHSS 16 A1 - IAN 304415 User Manual - German, Dutch, Danish, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info