663571

Silvercrest SHSS 12 C2 - IAN 277091 Manual

10
Zoom out
Zoom in
Previous page
1/63
Next page
SHSS 12 C2
GB
│
IE
│
NI 
│
 7 ■
Operation
ATTENTION! MATERIAL DAMAGE!
► The suction opening must always be open and
unblocked. Blockages lead to overheating and
damage to the motor.
► Do not vacuum shag pile carpet with the floor
nozzle. The rotary brush . can get caught in
the carpet and block!
NOTE
► Make certain that the dust filter and the
coarse filter are always inserted before
using the appliance.
► As soon as the suction power of the appliance
begins to diminish noticeably, connect the
appliance to the charger +.
Using the hand element with the
handle
1) Insert the hand element into the hand
element recess ! as described in the chapter
"Assembly/disassembly".
2) Fold out the grip by pressing the "Grip"
release - and at the same time pulling the
grip upwards.
3) Switch on the appliance using the on/off
switch . The LED lamp 0 on the floor nozzle
will illuminate and the rotary brush . starts
turning.
4) Guide the floor nozzle over the area to be
vacuumed. Hold the grip so that the floor
nozzle moves smoothly over the floor.
5) Press the on/off switch when you have
finished vacuuming. The rotary brush . stops
and the LED lamp 0 goes out.
Using the hand element
1) Remove the hand element from the hand
element recess ! as described in the chapter
"Assembly/disassembly".
2) As required, attach the crevice tool 1, the
brush nozzle 6 or the upholstery nozzle %.
3) Set the on/off switch to start vacuuming the
desired areas.
4) When you have finished vacuuming, press the
on/off switch again.
Cleaning and care
WARNING! RISK OF INJURY!
► Always disconnect the charger +from the
mains socket and remove the barrel jack ,
from the charging socket on the cradle "
before cleaning the cradle ".
► Always remove the hand element from the
hand element recess ! on the handle before
cleaning the hand element , the handle or
the rotary brush ..
To achieve the best results, empty the dirt container
and clean the dust filter after every use.
ATTENTION! MATERIAL DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
NOTE
► The LED lamp 0 is maintenance-free.
The LEDs cannot be changed.
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-shss-12-c2---ian-277091

Reset search

  • I took the hand held device apart to clean it. Now the unit does not charge. Submitted on 3-7-2020 at 17:57

    Reply Report abuse

  • Only runs for 20 seconds after full charge. What's wrong? Submitted on 31-10-2017 at 13:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHSS 12 C2 - IAN 277091 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHSS 12 C2 - IAN 277091 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info