663573
8
Zoom out
Zoom in
Previous page
1/53
Next page
5
SHSS 12 A1
GB
IE
Assembly/disassembly
Floor nozzle
Attach the fl oor nozzle to the handle so that the
connection plug of the fl oor nozzle u engages
with the connection socket i on the handle.
To remove the fl oor nozzle, simply pull it from
the handle.
Connecting the hand element to the
handle/removal from handle
Fig. 1 Fig. 2
To connect the hand element 5 to the handle,
push the tip of the hand element 5 into the
opening in the hand element recess
r.
Then press the grip 1 of the hand element 5
into the handle so that the hand element 5
clicks fi
rmly into position (Fig.1).
To remove the hand element 5 from the handle,
pr
ess the “Hand element” release w.
Then pull the hand element 5 upwar
ds and for-
wards out of the hand element recess r (Fig. 2).
Operation
ATTENTION! DAMAGE TO PROPERTY!
The suction opening must always be open and
unblocked. Block
ages lead to overheating
and damage to the motor.
Do not vacuum shag pile carpet with the fl oor
nozzle. The ro
tary brush t can get caught in
the carpet and block!
NOTE
Make certain that the dust fi lter 7 and the
coarse fi
lter 8 are always inserted before
using the appliance.
As soon as the suction power of the appli-
ance begins to diminish noticeably, connect
the appliance to the char
ger p.
Using the hand element with the
handle
1) Insert the hand element 5 into the hand
element recess r as described in the chapter
Assembly/disassembly”.
2) Fold out the grip 0 by pressing the “Grip”
release q and at the same time pulling the
grip 0 upwards. You have the choice of two
positions into which the grip 0 will click into
place.
3) Attach the fl oor nozzle.
4) Switch on the appliance using the on/off
switch 2. The operating light z on the fl oor
nozzle will light up and the rotary brush t
starts turning.
5) Guide the fl oor nozzle over the area to be
vacuumed. Hold the grip 0 so that the fl oor
nozzle moves smoothly over the fl oor.
6) Set the on/off switch 2 to “O” when you
have fi nished vacuuming. The rotary brush t
stops turning and the operating light z goes
out.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHSS 12 A1 - IAN 90876 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHSS 12 A1 - IAN 90876 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info