Manual Silvercrest SHMSB 300 A1 - IAN 31127 (page 25 of 28) (English, German, Dutch)

679456

Zoom out

Zoom in

1/28

SHMSB 300 A1

2) Push the whisks 8 or the kneading hooks 9

into the slots 7 until they click audibly into

place and are secure.

Always insert the kneading

hook 9 or the whisk 8

without the ring into the

intended slot on the appli-

ance (labelled with an icon).

Always insert the kneading

hook 9 or the whisk 8 with

the ring on the shaft into the

intended slot on the appli-

ance (labelled with an icon).

3) Insert the mains plug 4 into a mains power

socket.

4) To start operating the appliance, move the speed

switch 2 to the desired speed setting. You can

select between 5 speed settings and also use

the Turbo button 3 (see section "Speed levels").

5) Press the tool release button 1 to release the

whisks 8 or the kneading hooks 9.

NOTE

►

For safety reasons, the whisks 8 and kneading

hooks 9 can only be released if the speed

switch 2 is set to position "0".

Pureeing

WARNING! RISK OF INJURY!

► Never use containers made from glass or

other easily breakable materials. These con-

tainers may be damaged and cause injuries.

ATTENTION! DAMAGE TO PROPERTY!

►

Never use the blender 0 for hard foodstuﬀ s

such as: coﬀ ee beans, ice cubes, sugar,

cereals, chocolate, raw/hard vegetables etc.

This could result in serious damage to the

appliance.

1) Open the ﬁ xture with the safety cover 5 and

hold the safety cover ﬁ rmly.

NOTE

►

The blender 0 can only be used if the

whisks 8 or the kneading hooks 9 are not

installed.

2) Push the blender 0 into the ﬁ xture 5 and

tighten it by turning in the direction of the

arrow

and applying slight pressure.

3) To avoid overﬂ owing, the container used for

blending should only be ﬁ lled to about 2/3 of

its capacity. Select a suitably large container

or use the supplied measuring jug q.

NOTE

►

In order to ensure that the ingredients are

properly mixed, the food that is being pro-

cessed should cover at least the lower part

of the blender 0.

► Do not switch the hand mixer on until the

blender 0 has been inserted into the ingre-

dients to be blended.

4) Move the speed switch 2 to the "Blender"

setting

(see chapter "Speed levels") and

press the Turbo button 3. Keep the Turbo

button 3 pressed down during the whole

procedure. The appliance stops as soon as it

is released.

ATTENTION! DAMAGE TO PROPERTY!

►

Do not operate the blender 0 continuously

for longer than 1 minute. After one minute of

use, allow the appliance to cool down fully.

IB_31127_SHMSB300A1_LB1.indb 22IB_31127_SHMSB300A1_LB1.indb 22 12.02.14 17:4212.02.14 17:42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHMSB 300 A1 - IAN 31127 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SHMSB 300 A1 - IAN 31127

Silvercrest SHMSB 300 A1 - IAN 31127 User Manual - English - 31 pages

Silvercrest SHMSB 300 A1 - IAN 31127 User Manual - French - 19 pages

Silvercrest SHMSB 300 A1 - IAN 31127 User Manual - Portuguese, Spanish - 31 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SHMSB 300 A1 - IAN 31127 Manual

Product: