740036
48
Zoom out
Zoom in
Previous page
1/53
Next page
- 45 -
Never fill the mixing bowl 7 with more than a
total of 1.5 kg of ingredients. Otherwise the
motor may be damaged.
5. Replace the mixing bowl 7 onto the mixing
stand 6.
6. Press the unlocking button 5 and lower the hol-
der downwards.
7. Place the hand element 0 on the holder so that
it firmly engages.
8. Slide the lid 9 into the guiderails on the mixing
stand 6 so that it is firmly seated.
Note:
Should you wish to add ingredients whilst mixing,
open the filler opening 8 and insert them through
it. To avoid a splattering of the ingredients, be sure
to reclose the filler opening 8!
You can also use the hand mixer without the mixing
stand 6. Especially with minor amounts of liquids
you are advised to use the hand mixer without the
mixing stand 6. Otherwise, the liquid may not be
completely captured and thus not mixed thoroughly.
Attention:
Under no circumstance should you use receptacles
made of glass or other very fragile/easily breakable
materials. These containers can be damaged and
then cause potentially serious injuries.
9. Insert the plug into a mains power socket.
10. To set the mixer into motion, push the speed
switch 1 to the desired speed setting. You
can select between 5 speed settings or the
turbo button 2 (see section "Speed levels").
Warning:
Do not operate the mixer for longer than 10 minutes
in one session. After 10 minutes, allow the appliance
to rest until it has cooled itself down. Otherwise, the
appliance could be irreparably damaged.
Note:
If ingredients become stuck to the side of the mixing
bowl 7 and they cannot be captured with the
kneading hooks r/ whisks e, switch the hand mixer
off. Remove the lid 9. Use the dough scraper t to
push them back into the middle of the mixing bowl 7.
Replace the lid 9. Switch the hand mixer back on.
11. To remove the bowl contents, switch the appli-
ance off. Pull the lid 9 to the side and remove
it. Press the unlocking button 5, lift the holder
upwards and remove the mixing bowl 7 from
the mixing stand 6.
Note:
In the case of larger amounts in the mixing bowl 7,
it is to be recommended that you first remove the
mixer from the holder.
12. Press the unlocking button for the handmixer 4
to remove the hand mixer and the ejection but-
ton q to release the whisks e or the kneading
hooks r.
Note:
For safety reasons, the whisks e or the dough
hooks r can only be released when the speed
switch 1 is in the position "0" or " " shows.
IB_90843_SHMS300B1_LB1.qxp 17.06.2013 11:07 Uhr Seite 45
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHMS 300 B1 IAN 90843 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHMS 300 B1 IAN 90843 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info