576699
14
Zoom out
Zoom in
Previous page
1/102
Next page
11
SHBS 600 A1
GB
IE
NOTE
In order to reduce friction, occasionally apply a couple of drops of blade
oil (accessory) between the blades, and then distribute it evenly. You can
also use any non-corrosive oil (e.g. sewing machine oil). Wipe off any
access oil with a soft cloth.
Disposal
Disposal of the appliance
Under no circumstances should you dispose of the appliance in
normal household waste. This product is subject to the provisions
of European Directive 2012/19/EU (Waste Electrical and Electronic
Equipment).
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please observe applicable regulations. Please
contact your waste disposal facility if you are in any doubt.
NOTE
Before disposing of the appliance it is essential to fi rst remove the battery.
WARNING
Removal of the battery requires a certain amount of manual dexterity;
otherwise there is a risk of injury! If you have no experience in using tools,
you should entrust the task to someone who is competent to do the job
properly.
Ensure that the battery does not get damaged during removal. Risk of fi re!
The removed battery may not be reused.
Never short-circuit the battery. The contacts on the removed battery should
not be connected by an metallic objects. The battery can overheat and
explode.
WARNING! Only remove the battery for disposal of the appliance.
Removal will destroy the appliance. Never operate an appliance that has
been dismantled.
Disconnect the appliance from the power supply.
Switch on the appliance and let it run until the battery is fully discharged.
Remove the cutting unit from the appliance (see chapter Cleaning and care)
There are three screws on the rear of the appliance. Two of the screws are in the
mounting opening for the cutting unit.
Loosen both the screws with a Phillips screwdriver.
IB_102827_SHBS600A1_LB3.indb 11 23.10.14 09:20
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHBS 600 A1 - IAN 102827 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHBS 600 A1 - IAN 102827 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info