576699
11
Zoom out
Zoom in
Previous page
1/102
Next page
8
SHBS 600 A1
GB
IE
Operation with the mains power adapter
If your hair and beard trimmer stops working during shaving due to a discharged
or weak battery, you can continue shaving by plugging in the mains power
adapter
9
.
Plug the cable plug of the mains power adapter
9
into the socket
8
on the
underside of the hair and beard trimmer.
To avoid injuries and damage to the appliance, always switch the appliance
off before connecting it to the power supply.
Plug the mains power adapter
9
(wide-range voltage 100–240 V) into a
power socket complying with the appliance specifi cations.
After 1–2 seconds, you can switch the appliance on by pressing the ON/OFF
switch
6
. If the appliance does not start immediately, switch it off again and
wait around 1 minute before switching it on again.
Oiling the cutting units
We recommend that you oil the cutting unit before fi rst use and after cleaning
to ensure full mobility.
To do this, simply apply a couple of drops of blade oil (accessory) between the
blades, and then distribute it evenly.
Wipe off any access oil with a soft cloth. Use only non-corrosive oils such as
sewing machine oil.
Handling and operation
Attaching/changing the cutting length attachments
The cutting length attachments
10
and
11
off er settings for 10 diff erent cutting
lengths (4/7/10/13/16/18/21/24/27/30mm).
Push the respective cutting length attachment (
10
or
11
) onto the cutting unit
from above so that the two side rails slot into the provided guides.
Push the cutting length attachment (
10
or
11
) down until it snaps into place on
the mounting points
4
.
To remove the cutting length attachment, move the slide switch for cutting length
adjustment
5
upwards (position 5) and then pull the cutting length attachment
(
10
or
11
) upwards off the appliance.
IB_102827_SHBS600A1_LB3.indb 8 23.10.14 09:20
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHBS 600 A1 - IAN 102827 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHBS 600 A1 - IAN 102827 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info