739903
67
Zoom out
Zoom in
Previous page
1/73
Next page
64
SHBS 1000 A1
GB
Operation with the power supply unit
If your hair and beard trimmer stops working during shaving due to discharged
or weak batteries, you can continue shaving by plugging in the power supply
unit
6
.
Plug the power supply unit plug
6
into the socket on the underside of the hair
and beard trimmer.
To avoid injuries and damage to the appliance, always switch the appliance off
before connecting it to the power supply.
Plug the power supply unit
6
(wide voltage range 100 - 240 V) in a power
socket complying with the appliance specifi cations.
After 1 - 2 seconds, you can switch the appliance on by pressing the ON / OFF
switch
3
. If the appliance does not start immediately, switch it off again and
wait around 1 minute before switching it on again.
If you want to charge the batteries without using the charging station
5
in this
manner you can only do this when the appliance is switched off .
Handling and use
Improving battery service life
We recommend completely discharging the batteries before recharging to ensure
a long battery service life. In order to completely discharge the batteries, run the
appliance until it stops completely.
Cutting hair
NOTE
Any hair to be cut should be clean and dry.
Brush the hair carefully through to remove any knots.
Place the hairdressing cape or cloth around your neck and throat to avoid
cut hair ends falling inside your collar.
First start using a longer cut length add-on
7
and then shorten your hair in
stages until it has the required length.
Cut length add-ons
7
:
Select a suitable cut length add-on
7
to match your required hair length (4 - 6
mm / 7 - 9 mm / 10 - 12 mm / 16 - 18 mm / 22 - 24 mm / 28 - 30 mm).
Click the selected cut length add-on
7
onto the trimmer block
from behind.
Ensure that both pins in the cut length add-on
7
correctly locate into the side
cutouts in the trimmer head holder.
IB_86722_SHBS1000A1_LB1.indb 64IB_86722_SHBS1000A1_LB1.indb 64 18.03.13 16:4118.03.13 16:41
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHBS 1000 A1 IAN 86722 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHBS 1000 A1 IAN 86722 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info