576580
13
Zoom out
Zoom in
Previous page
1/74
Next page
10
SGBR 1500 A1
GB
IE
NOTE
As a general rule, if you are baking or grilling
with hot air you can dispense with a pr
eheating
of the grilling/cooking space.
Use the timer 4 to set the preheat time
(appr
ox. 10 minutes).
Close the glass door 6.
4) Once the warm-up period is fi nished, place
the foodstuff s on the rack e or the baking
tray q and slide it in on one of the rails.
Ensure that there is suffi cient space between
the foodstuff s and the inner walls/heating
elements of the appliance.
NOTE
If you wish to prepare food on the rack e
that drips ex
cessively, then slide the baking
tray q onto the bottom rail. By doing this,
dripping fat for example will be caught and
the appliance is then easier to clean.
5) Close the glass door 6 before starting the
grilling or baking process.
6) Use the timer 4 to set the required grilling or
baking time. The maximum grilling or baking
time is 120 minutes.
NOTE
If the cooking time for the food is less than
20 minutes, fi
rst set the timer 4 to 40 minutes
and then turn it back to the required grilling
or baking time.
The control lamp 5 indicates that the appliance is
now switched on. The switch of the timer 4 now
rotates itself anti-clockwise to “OFF - 0”.
The appliance switches off automatically after the
set period, there is a beep and the control lamp 5
switches off .
NOTE
If you want to interrupt the heating process
prematur
ely, turn the temperature control 2
counter-clockwise to the stop and set the timer 4
to "OFF - 0".
7) After cooking, remove the rack e or the baking
tray q using the tongs 0.
8) Set the function switch 3 to “OFF”.
Grilling with the rotisserie
1) Put the crumb tray 7 into the appliance.
2) If inserted, remove the rotisserie z from the
appliance.
3) Push the baking tray q onto the lower rail.
4) Fix the food to be grilled with the skewer
clamps t. Ensure that the food in the cooking
chamber can turn freely without touching the
sides. The rotisserie z may change its direction
of rotation if the food strikes against a resistance.
The two depressions on the rotisserie z must
remain freely accessible, otherwise you will
not be able to grasp the rotisserie z with the
tongs w.
5) Fit the rotisserie z in the cooking chamber
(see chapter “Using the rotisserie”)
6) Close the glass door 6.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SGBR 1500 A1 - IAN 102464 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SGBR 1500 A1 - IAN 102464 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info