632464

Silvercrest SGB1200 A1 - IAN 271177 Manual

9
Zoom out
Zoom in
Previous page
1/99
Next page
6
SGB 1200 A1
GB
IE
Installation
WARNING! RISK OF FIRE!
► Never place the appliance beneath wall
cabinets or adjacent to curtains, wall units
or other flammable objects.
► A minimum clearance of 10 cm must be
maintained between the appliance and wall
cupboards, ceilings, walls or similar structures,
measured upwards of the appliance, and
5 cm measured laterally. For this reason the
appliance may not be used, for example, in
cupboards or similar. Otherwise there is likely
to be insufficient ventilation for the appliance,
which could result in fire or damage.
► Always place the appliance on a heat-resist-
ant surface. Failure to do so increases the risk
of fire or of the appliance being damaged.
The surface under appliance may become
discoloured and be damaged. Additionally,
permanent indentations could arise if the
appliance is placed on a soft surface.
DANGER – ELECTRIC SHOCK!
► Do not place the appliance immediately adja-
cent to sources of water, e.g. sinks or basins,
or in damp cellar areas. Otherwise, there is a
risk of receiving an electric shock.
■ Place the appliance on a solid, level and heat-
resistant surface (e.g. stainless steel worktops
or natural stone worktops such as granite).
Ensure there is sufficient ventilation around the
appliance.
■ Push the appliance up against the wall, with its
rear side facing the wall. The spacers on the
back must touch the wall. Ensure that the wall is
made of heat-resistant material, e.g. tiles, natural
stone or granite.
■ Clean all components as described in the section
“Cleaning and care”.
Using the appliance
Glass door
CAUTION! PROPERTY DAMAGE!
►
Do not lean on the glass door. Do not place
objects on the glass door. This can cause
damage to the door hinges.
■ Cooking some foods, especially fatty foods,
can result in increased smoke production. In this
case, do not close the glass door completely;
instead, leave it slightly open.
The glass door has a latching position so that
it remains open a little: if you carefully push
the glass door closed, it clicks into this position
shortly before closing completely.
Inserting the crumb tray
■ Push the crumb tray under the lower heating
element so that it rests flat on the bottom of the
appliance.
Using the rack
WARNING! RISK OF INJURY!
► Always use the tongs -to insert the rack
into the appliance or to remove it.
■ Push the rack onto one of the 2 rails in
the cooking chamber of the appliance.
CAUTION! MATERIAL DAMAGE!
► Never place the rack directly upon the
heating elements.
■ If you slide the rack onto the lower rail, pull
this out far enough so that the edge lies just
above the extraction hooks . Thus, when you
close the glass door, the extraction hooks
grip the rack and this is pulled out the next
time you open the glass door.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SGB1200 A1 - IAN 271177 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SGB1200 A1 - IAN 271177 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info