575511

Silvercrest SGB 1380 B2 - IAN 89210 Manual

38
Zoom out
Zoom in
Previous page
1/46
Next page
- 35 -
- With the time switch
5
set the pre-heat time
(ca. 10 minutes).
- Close the glass door.
➩ When the warm-up period is finished, place
the foodstuffs on the roasting grill
7
resp. the
baking tray
8
and slide it in on one of the
rails
6
. Ensure that there is sufficient space
between the foodstuffs and the inner walls/
heating elements of the appliance.
Attention!
NEVER place objects, food, bowls, the baking tray
8
,
the roasting grille
7
or other containers directly
on the bottom of the oven! The resulting heat accu-
mulation will damage the appliance! ALWAYS place
food, bowls or other containers on the baking tray
8
or the roasting grille
7
, and slide these into one of
the 3 rails
6
.
If you wish to prepare food on the roasting grill
7
that drips excessively, then slide the baking tray
8
into the bottom rail. By doing this, dripping fat
for example will be caught and the appliance
is then easier to clean.
The most uniform baking results are obtained
when the baking tray
8
resp. the roasting grill
7
are placed on the central runner and the air
circulation is switched on.
➩ Close the glass door before starting the grill or
baking process.
If you are cooking especially fatty foodstuffs,
an increased smoke development can occur.
In this case, do not close the glass door comple-
tely, instead, allow it to be slightly open: If you
carefully push the door to, it comes into this
position shortly before closing.
➩ Adjust the time switch
5
to the required gril-
ling or baking time.
The maximum grilling or baking time is 60 minutes.
➩ If the cooking time for the foodstuff amounts to
less than 25 minutes, first of all place the time
switch
5
at 60 minutes and then turn it back
to the required grilling or baking time.
The control lamp
1
indicates that your Oven with
Grill is switched on. The switch of the time switch
5
now rotates itself anti-clockwise towards OFF.
When your Oven with Grill has reached the set
temperature, the heating elements switch them-
selves off at intervals, to ensure that the tempe-
rature is maintained.
➩ The appliance switches itself off automatically
on completion of the programmed time. If you
wish to switch the appliance off prematurely,
turn the time switch
5
back to OFF. Place the
function switch
3
at the position OFF and re-
move the plug from the power socket.
You will hear a signal sound and the control lamp
1
extinguishes.
After the appliance has switched itself off, the
time switch
5
can continue to run for a short
period.
IB_89210_11_SGB1380B2_DE_NL.qxp 16.10.2013 8:50 Uhr Seite 35
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SGB 1380 B2 - IAN 89210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SGB 1380 B2 - IAN 89210 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info