576708

Silvercrest SFW 350 C1 - IAN 103776 Manual

10
Zoom out
Zoom in
Previous page
1/93
Next page
7
GB
IE
SFW 350 C1
5) Place your selected cutting disc 9 into the meat grinder casing 5 so that
the fi xings on the cutting disc 9 are located in the openings in the meat
grinder casing 5.
6) After everything has been correctly assembled, screw the ring clamp 0
back on hand-tight.
7) The ready-assembled meat grinder casing 5 is connected by a bayonet
connector to the motor block 4:
– Insert the meat grinder casing 5 into the motor block 4 such that the
arrow on the meat grinder casing 5 lies against the symbol
on the
motor unit 4. The locking button r presses itself in (Fig. B).
– Lightly press the meat grinder casing 5 in and at the same time turn
the feeding shaft on the meat grinder casing 5 into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol
.
When the meat grinder casing 5 engages, the locking button r
springs out.
– Finally, place the feeding tray 3 on top of the feeding funnel.
– To dismantle it, press the locking button r and turn the feeding funnel
to the right (Fig. B)
. You can now pull the meat grinder casing 5 out.
Assembling the sausage stuff er attachment
Unfold the fold-out side - there you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing 5 as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fi tted to/in the meat grinder casing 5 and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw 6, the spring 7 and the cross blade 8 back into
the meat grinder casing 5.
5) Insert the sausage disc w so that the fi xings on the sausage disc w are
located in the openings in the meat grinder casing 5.
6) Then place the sausage stuff er attachment q before the sausage disc w.
7) Screw the ring clamp 0 on hand-tight.
8) Assemble the meat grinder casing 5 as described under “Assembling the
meat grinder”.
IB_103776_SFW350C1_LB3.indb 7 15.10.14 13:03
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFW 350 C1 - IAN 103776 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFW 350 C1 - IAN 103776 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info