754155
19
Zoom out
Zoom in
Previous page
1/91
Next page
17
GB
~If the device has fallen into water, pull
out the mains plug immediately, and
only then remove the device from the
water. Do not use the device again,
and have it checked by a specialist
workshop.
~Never touch the device with wet hands.
DANGER! Risk of electric
shock
~Do not use the device if the device or
the power cable has any visible dam-
age, or if the device has previously
been dropped.
~Lay the power cable such that no one
can step on it, get caught on it, or trip
over it.
~Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
~Ensure that the power cable cannot be
damaged by sharp edges or hot points.
Do not wrap the power cable around
the device (Danger! Risk of cable dam-
age!). Use the cable spool at the bottom
of the device.
~Let the device cool down completely be-
fore winding up the power cable.
~Ensure that the power cable cannot be
trapped or crushed.
~To pull the mains plug out of the wall
socket, always pull on the mains plug,
and never on the power cable.
~Disconnect the mains plug from the wall
socket …
after every use,
if there is a fault,
when you are not using the device,
before you clean the device and
during thunderstorms.
DANGER! Fire hazard
~Never leave the device unattended
while it is plugged in.
~Use the device on a stable, level and
heat-resistant surface.
~Never cover the device when connect-
ed due to possible overheating and fire
hazard!
~Do not use the device in the vicinity of
flammable materials or flammable gas-
es.
DANGER! Risk of injury
through burning
~The welding wire becomes very hot dur-
ing operation. Do not touch the hot
welding wire.
~Allow the device to cool down com-
pletely before you clean it or put it
away.
DANGER caused by
insufficient hygiene
~For a carefree enjoyment of your vacu-
um-sealed food, you should always
comply with the following hygiene tips:
- During the preparation and packag-
ing of the food make sure that the en-
tire equipment is perfectly clean.
- After use, clean the bag sealer and
the entire equipment thoroughly as
soon as possible.
- Perishable food shall be cooled or fro-
zen immediately after sealing.
- After thawing or heating perishable
food, this must be consumed immedi-
ately.
WARNING! Risk of material damage
~Observe the specified operating time of
the device. After the sealing or vacuum-
ing process, the device must cool down
for at least 80 seconds.
~Only use special plastic films suited for
the use of bag sealers.
BBB)ROLHQVFKZHLJHUlWB%ERRN6HLWH'RQQHUVWDJ6HSWHPEHU
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFS 110 C2 - IAN 295933 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFS 110 C2 - IAN 295933 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info