646937
12
Zoom out
Zoom in
Previous page
1/84
Next page
9
GB
IE
SFS 110 A1
NOTE
The bag opening must lie flat on the welding wire . Otherwise the weld-
ing does not work properly.
4) Close the appliance lid . The press seal presses the bag onto the welding
wire , to create a smooth seam. Ensure that both corners of the appliance
lid click closed. If necessary, press them down once again on the markings
and so that the appliance lid clicks into place and locks shut.
5) Press the
button 3. The red control lamp - lights up. As soon as the
sealing process is finished, the red control lamp - goes off.
NOTE
You can halt the sealing process at any time by pressing the
button !.
The red control lamp - goes out.
CAUTION – PROPERTY DAMAGE!
If the red control lamp - does not go out after a maximum of
10 seconds, there is a fault with the appliance.
Remove the plug from the mains power socket immediately. Do not attempt
to repair the appliance yourself. Contact the Customer Service department.
6) Open the appliance lid by pressing the lid release and flipping the lid
upwards. Remove the bag. This is now sealed at one end.
NOTE
Ensure that the weld seam is properly closed. A correct weld seam should
be a smooth, straight stripe without any creases.
7) Fill the bag. You must leave at least 6 cm of the bag free up to the edge to
be welded.
CAUTION – PROPERTY DAMAGE!
Fill the bag so that no food scraps or liquids can leak out during welding
and get into the appliance.
8) If you do not want to vacuum the bag, you can now weld the other, open side.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFS 110 A1 - IAN 115128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFS 110 A1 - IAN 115128 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info