740037
54
Zoom out
Zoom in
Previous page
1/58
Next page
52
GB
9. Replacing shaving
foils/cutter blocks
WARNING! Do not use the device if the
shaving foils1 are damaged.
NOTE: replacement shaving foils and cutter
blocks can be ordered:
- on www.hoyerhandel.com
- or at the service centre hotline, (chapter
"Warranty of HOYER Handel GmbH" on
page 54)
The shaving foils1 and the cutter blocks13
must be replaced, …
when you can see signs of damage,
… when you feel pinching when shaving or
if the shave is not close, and if this is not
remedied by oiling of the shaving foils1
and the cutter blocks13 (see chapter
"Cleaning and maintenance of the de-
vice" on page 51) and
depending on the intensity of use, but
generally after one year.
1. Figure A: press both release but-
tons3 and take off the shaving foil
frame2.
2. Press the release button10. The shav-
ing head4 opens up.
3. Figure B: take an old cutter block13
on both ends between your thumb and
index finger and pull it off the shaver
carefully. Ensure that the spring, which
is located between the cutter block and
the white bracket, does not fall out.
4. Take a new cutter block13 on both
ends between your thumb and index
finger and insert it into the white brack-
et carefully. Press the cutter block right
down once until it engages audibly.
5. Close the shaving head4.
6. Press the new shaving foil frame2
down on the shaving head until it
engages audibly.
10. Disposal
Removing the batteries
This device is operated with two re-
chargeable nickel-metal-hydride batter-
ies, which you must remove before
disposing of the device.
You must be technically minded to re-
move the batteries, otherwise there is
the danger of injuring yourself. If you
do not have any experience with tools,
you should have the batteries removed
by a person who is qualified to do this.
DANGER from batteries!
Ensure that the batteries are not dam-
aged as you remove it. Fire hazard!
The removed batteries must not be dis-
assembled.
Never short-circuit the batteries. The
contacts on the removed batteries must
not be connected by metallic objects.
The batteries may overheat and ex-
plode.
Only remove the batteries to dispose of
the device. The device is destroyed by
removing the batteries. Never try to op-
erate a disassembled device.
1. Disconnect the plug-in power unit14
from the device.
2. Switch on the device and let it run until
the batteries are empty.
3. Figure C: remove the decorative strip
on the side, along with any adhesive
residues and lever the top cover plate
off with a screwdriver.
4. Figure D: loosen the 5 screws with a
Phillips screwdriver.
5. Figure E: use a screwdriver to lever
open the side seam and take the two
halves of the housing apart.
6.
Figure F:
release the connections be-
tween the batteries and the board with a
__GRA90253_B2.book Seite 52 Mittwoch, 24. April 2013 9:38 09
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFR 1200 A1 IAN 90253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFR 1200 A1 IAN 90253 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info