740037
50
Zoom out
Zoom in
Previous page
1/58
Next page
48
GB
DANGER! Risk of electric
shock
Only connect the plug-in power unit to a
properly installed and easily accessible
wall socket, whose voltage corre-
sponds to the specifications on the rat-
ing plate. The wall socket must continue
to be easily accessible after the device
is plugged in.
Ensure that the plug-in power unit cable
cannot be damaged by sharp edges or
hot surfaces. Do not wrap the plug-in
power unit cable around the device.
When using the device, ensure that the
plug-in power unit cable cannot be
trapped or crushed.
When removing the plug-in power unit
from the wall socket, always pull the
plug and never the cable.
Pull the plug-in power unit out of the
wall socket, …
if there is a fault,
when you are not charging the de-
vice,
during thunderstorms and
… before removing batteries for disposal.
Do not use the device if there is visible
damage on the device, the plug-in pow-
er unit, or the corresponding cable.
If the plug-in power unit or the corre-
sponding cable of this device are dam-
aged, they must be replaced by the
manufacturer or its customer service de-
partment or a similarly qualified person,
to prevent any hazard.
DANGER from batteries
Do not expose the device to direct sun-
shine or heat. The ambient temperature
should not be lower than 0 °C and high-
er than +40 °C.
The charge contacts on the device must
not be connected by metallic objects.
The batteries may only be charged with
the original accessory (plug-in power unit).
When the batteries have reached the
end of their service life, the batteries
must be removed and the device and
the batteries must be disposed of (chap-
ter "Disposal" on page 52). Do not try
to replace the batteries.
The batteries which have been removed
for disposal may not be reused or taken
apart.
Protect the batteries against mechanical
damages. Fire hazard!
Should the electrolyte solution leak out
of the batteries, avoid contact with
eyes, mucous membranes and skin.
Rinse immediately with plenty of clean
water and consult a doctor. The electro-
lyte solution can cause irritation.
The removed batteries may not be
thrown into a fire or short-circuited. The
batteries may overheat and explode.
WARNING! Risk of injury
Place the plug-in power unit cable in
such a way that no one trips over it or
steps on it.
Do not switch on the device if the shav-
ing head has been flipped open.
The cutting blades are sharp. Handle
with care.
Do not use the device if the shaving foil
or the shaving head are damaged.
Do not use the device on open wounds,
cuts, sunburn or blisters.
WARNING! Risk of material
damage
Only use the original accessories.
Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
Do not cover the plug-in power unit to
prevent overheating.
Do not use any astringent or abrasive
cleaning agents.
__GRA90253_B2.book Seite 48 Mittwoch, 24. April 2013 9:38 09
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFR 1200 A1 IAN 90253 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFR 1200 A1 IAN 90253 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info