Manual Silvercrest SFM 840 A2 - IAN 96745 (page 49 of 58) (English, German, Dutch, French)

646956

Zoom out

Zoom in

1/58

SFM 840 A2 47

(lower marking MIN = minimum, upper

marking MAX = maximum).

• The appliance must never be placed

immediately beneath a wall socket as

the heat it generates could damage the

electrical installation.

• Never leave the appliance running

unattended. Damage is almost always

indicated by intensive odours. In this

case, disconnect the power supply

immediately and have the appliance

examined. You will find the service

address in “Service Centre” on

page 54.

4.6 For the safety of your child

Warning! Children are often

unaware of danger and are injured

as a result. Please note therefore:

• Only allow children to use this device

under the supervision of an adult.

• Ensure the machine is always kept out of

the reach of children.

• Ensure that a child cannot pull down or

tip the appliance onto himself or herself.

• Ensure that the packing foil does not

become a deadly trap for a child.

Packing film is not a toy.

4.7 Protection against scalds and burns

Warning! As the appliance

operates at high temperatures,

please observe the following

safety information so that you do

not burn or scald yourself.

• All parts must be completely dry before

you pour oil or liquid fat into the deep-

fat fryer. Otherwise the heated fat could

spit badly.

• You should ideally use frying oil or liquid

frying fat.

• If you use solid frying fat, you should first

melt the blocks of fat slowly in a normal

pan in order to avoid overheating and

the fat spitting. Then pour the melted fat

carefully into the deep-fat fryer before

switching the fryer on.

• You must only use oils or fats that do not

foam and that are suitable for frying.

Please refer to the packaging or label

for further information.

• Hot steam is released during the frying

process. Maintain an adequate distance

from the steam.

• The fat may start spitting when melted

again if it is too cold! Avoid this by

making some holes with a fork in the re-

solidified fat. Be careful not to damage

the fat container 6 while doing so.

• If you wish to move the appliance, switch

it off, pull out the plug and wait until the

appliance has cooled down.

5. Before using for the first time

1. Please clean the individual parts of the

deep-fat fryer thoroughly (see

“9. Cleaning” on page 51).

2. Then carefully dry the individual parts.

RP96745 Fritteuse mit FondueLB2 Seite 47 Mittwoch, 26. Februar 2014 12:04 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFM 840 A2 - IAN 96745 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SFM 840 A2 - IAN 96745 Manual

Product: