738909
44
Zoom out
Zoom in
Previous page
1/62
Next page
- 42 -
Emptying the pulp container
and the filter
You can extract juices continuously until the container
for fruit pulp and vegetable mash
s
is completely
full.
Warning:
Remove the plug from the power source when
emptying the filter
d
. This prevents an unintended
starting of the motor.
When the extracted juices suddenly become thicker,
or when you hear that the motor is running slower,
the filter
d
must be emptied. When you have removed
the fruit pulp/vegetable mash, reassemble the
appliance.
Disassembly of the juice extractor
If you wish to disassemble the juice extractor, e.g.
to clean it, proceed as follows:
1. Remove the power plug from the wall socket
i
.
2. Open the clasps
r
.
3. Remove the housing lid
e
with the stodger
q
.
4. Carefully lift up the juice container
t
. With this,
the filter
d
releases itself from the drive shaft
f
.
You can now take the filter
d
out of the juice
container
t
.
Cleaning and Care
Warning:
ALWAYS remove the power plug from the wall socket
before removing or installing accessories and before
cleaning the appliance. To avoid blockage of the
juice outlet and/or damage to the appliance, all
appliance and ancillary parts must be regularly,
and after every use, cleaned free of fruit pulp and
vegetable mash.
Note:
DO NOT use any aggressive cleaning agents to clean
the juice extractor. The appliance and its ancillaries
may not be cleaned in boiling water.
Warning:
To avoid receiving an electrical shock, NEVER
submerse the motor/appliance base
u
in water
or other fluids.
Switch the appliance off at the On/Off switch
o
.
Soiling or overflowing fruit juices should be cleared
away immediately, as fruit stains are difficult to
remove later.
For cleaning the appliance housing and the power
cable, use a cloth that is only lightly moistened.
Clean the stodger
q
, the separate juice collector
h
, the housing lid
e
and the container for fruit
pulp and vegetable mash
s
in warm soapy water
and then carefully rinse them off.
The stodger
q
, the juice container
t
, the housing lid
e
, the separate juice collector
h
and the container
for fruit pulp and vegetable mash
s
are suitable for
cleaning in a dishwasher and can be cleaned there.
To clean the filter
d
, use the supplied nylon brush
g
:
Turn the lid of the stodger
q
until the arrow points
to the opened lock on the stodger shaft. You
can now remove it.
The nylon brush
g
is inside the stodger
q
. To
re-close the lid, place it on the stodger so that
the arrow points to the opened lock .
Then turn it until the arrow points at the closed
lock . The lid now sits firmly.
Hold the filter
d
(with the underside upwards)
under running water and clean it with the nylon
brush
g
.
Colouring:
Some fruits or vegetables could permanently dis-
colour parts of the juice extractor. This is not da-
maging and does not impair the appliance in its
functions.
IB_66712_SFE450A1_LB5 10.05.2011 16:48 Uhr Seite 42
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFE 450 A1 IAN 66712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFE 450 A1 IAN 66712 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SFE 450 A1 IAN 66712

Silvercrest SFE 450 A1 IAN 66712 User Manual - German, Dutch, French, Italian - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info