679036
69
Zoom out
Zoom in
Previous page
1/92
Next page
67
Handling and operation
SWW 1500 A1
GB
MT
Whilst the preset time is blinking in the display press one of the buttons
+/-
4
and/or
13
to set the desired switch on time between 1 hour and 24
hours. As soon as the switch on time lights up continuously in the display
the setting is adopted and the device switches on, after the time has expired,
to the high heating output (HIGH).
Press the button AUTO ON
2
and/or
11
again if you want to deactivate
the switch on time. In the display the indicator AUTO ON goes out.
Overheating protection
With excessive temperature rise the device automatically switches off and in the
display
appears .
Should this occur...
Switch the device off at the main switch POWER
6
and pull the mains power
plug from the wall socket. Allow the device to cool down for a few minutes
After the cause of the overheating has been removed, i.e. a covered heating
element, the device can be switched on again.
Frost protection function
The device is equipped with a frost protection function which automatically switches
to the high heat output (HIGH) as soon as the room temperature falls below 7°C.
When the room temperature has reached 10°C the appliance automatically
switches back to standby mode.
Activate the main switch POWER
6
to switch the device on and to shift
into standby operation. In the display
the symbol for the frost protection
function
blinks.
The device now switches on if the room temperature drops below 7°C.
Topple over protection
The device is equipped with topple over protection which automatically switches
the heating element
9
off if the device topples over. In addition a warning tone
sounds for 1 minute.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFB 10.1B2 - IAN 66881 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFB 10.1B2 - IAN 66881 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SFB 10.1B2 - IAN 66881

Silvercrest SFB 10.1B2 - IAN 66881 User Manual - German, Dutch, French - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info