539995

Silvercrest SFB 10.1 C3 Manual

108
Zoom out
Zoom in
Previous page
1/116
Next page
SilverCrest SFB 10.1 C3
106 - English
7. Press to confirm. The display reads “DELETED” and then again
“SELECT KEY”.
8. Repeat steps 6 and 7 for each button for which you wish to delete
the code.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Deleting the device codes of an individual device (DELETE
DEV)
This function allows you to delete all learned codes for a selected device.
1. Press and hold the button for 3 seconds.
2. Press , select “LEARNING” and press to confirm.
3. Press , select “DELETE DEV” and press to confirm.
4. The display reads “SELECT DEV”.
5. Press the device button of the device for which you want to delete
the code. The display reads “SURE DELET”.
6. Press to confirm. The display reads “DELETED” and then again
“SELECT DEV”.
7. Repeat steps 5 and 6 for each device for which you wish to delete
the codes.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Deleting all button codes (DELETE ALL)
This function allows you to delete all learned codes for all devices at
once.
1. Press and hold the button for 3 seconds.
2. Press , select “LEARNING” and press to confirm.
3. Press , select “DELETE ALL” and press to confirm.
The display reads “SURE DELET”.
4. Press to confirm. The display reads “DELETED” and then again
“DELETE ALL”.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
The macro function (MACRO)
The macro function lets you save up to 16 commands for a device that
will be sent in sequence when pressing one single button.
Example: Power on TV > Select channel 11 > Display Teletext > Open
Teletext page 222.
Programming a macro
1. Press and hold the button for 3 seconds.
2. Press , select “MACRO” and press to confirm.
3. Press , select "MACRO1“ (or "MACRO2“…..
"MACRO6“ and press to confirm.
4. The display reads “SET UP”. Press to confirm.
5. If you select a macro that already has a command sequence
assigned, the display reads “MACRO HAS”. In this case you have to
delete this macro before entering commands or select a different,
free macro.
6. The device currently selected is shown.
… 108 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFB 10.1 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFB 10.1 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info