Manual Silvercrest SFB 10.1 B2 - IAN 71477 (page 23 of 109) (English)

621607

Zoom out

Zoom in

1/109

- 21 -

3.With the  or  button t select "LEARN CLEAR"

(taught delete) and conrm with the OK button l. In

the LCD display q "CONFIRM CLEAR" (conrm delete)

appears.

4. Conrm with the OK button l.

In the LCD display q

"SUCCESS" appears. All programmed buttons are de-

leted. Finally the menu will automatically end.

 Note:

When the LCD display shows “CONFIRM CLEAR” you can

stop the deletion with the EXIT button y.

Macro conﬁguration

With the MACRO function up to 16 button commands can

be carried out with the press of a single button, that is to say,

several previously saved control commands can be deleted

with one MACRO button. There are 6 Macro memory slots

available for you.

To programme a Macro

For Macro programming proceed as follows:

1. Hold down the S button r for a little longer than 3 sec-

onds. The notice "LANGUAGE SETUP" appears.

2.With the  or  button t select "MACRO SETUP" and

conrm with the OK button l. In the display "MACRO

SETUP 1" appears.

3.With the  or  button t select the memory slot to be

programmed (MACRO SETUP 1 - 6) and conrm with the

OK button l.

4. In the LCD display q "MACRO STEP" appears. Now

press, one after the other, the desired buttons (max. 16).

The sequence should begin with a device button e.

5.By default the Macro commands are sent in intervals of

1 every second. Since many devices react sluggishly it is

possible that the sequence of the Macro commands are

sent too quickly to the device. Then you have the option

of programming, before a button command, a pause

of between 5 - 21 seconds. For this purpose press, if nec-

essary repeatedly, the MACRO button i. Below

and to the right the LCD display q shows the current

pause length in seconds.

6. When the maximum number of button commands is

reached the LCD display q shows "FULL".

7. Save the entry with the S button r. In the LCD display q

"MACRO SETUP" appears.

8. If, with the selection of the Macros to be programmed

(step 3), you select a memory slot that is already occupied

the existing Macro will be overwritten.

9. Repeat the process from step 3 to create further Macros.

10.With the EXIT button y you move back a level in the

menu, except during the input of the button commands.

BDA_SFB 10.1 B2 - DT-71477_gb.indd 21 23.11.2011 16:24:26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFB 10.1 B2 - IAN 71477 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SFB 10.1 B2 - IAN 71477

Silvercrest SFB 10.1 B2 - IAN 71477 User Manual - German, Dutch, French - 90 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SFB 10.1 B2 - IAN 71477 Manual

Product: