642280

Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 Manual

13
Zoom out
Zoom in
Previous page
1/67
Next page
IT
GB / IE
13GB / IE
TROUBLESHOOTING
If there are problems with operation, immediately turn off the machine and
unplug it from the socket-outlet.
PROBLEMS CAUSES SOLUTIONS
The coffee
maker does
not supply
steam.
There is little water and the
pump does not suck it up.
Check that the water level in the tank is correct. If
necessary, fill it with cool tap water.
The steam exit hole on the dis
-
penser wand is clogged.
Unclog any deposits that may have formed in the
hole of the steam tube with a pin (Fig. 14).
Coffee over
-
flowing from
the edges of
the filter ring.
Probably an excess amount of
ground coffee has been placed
in the filter ring preventing the
filter ring from being correctly
tightened into its housing.
Slowly remove and disconnect the filter holder
because any remaining pressure could cause splash-
es or squirts. Clean the coupling seat with a sponge
(Fig. 13). Repeat the operation placing the correct
quantity of coffee in the filter.
Residues of ground coffee have
remained on the gasket of the
filter holder coupling seat.
Clean the seal with a toothpick or a sponge (Fig.
13).
The exit holes of the filter
containing coffee grounds are
clogged.
Slowly remove and disconnect the filter holder
because any remaining pressure could cause splash
-
es or squirts. Clean the clogged filter holes with a
small brush or a pin.
The coffee is
not supplied
or flows too
slowly.
The holes of the perforated disc
in the filter holder coupling seat
are clogged.
Turn on the machine without the filter holder, making
the water run. Turn on the machine without the filter
holder, making the water run. If the water still does
not come out from all the holes evenly, carry out the
descaling cleaning operation, following the instruc
-
tions provided in the package.
The exit holes of the filter
containing coffee grounds are
clogged.
Slowly remove and disconnect the filter holder
because any remaining pressure could cause splash
-
es or squirts. Clean the clogged filter holes with a
small brush or a pin.
The coffee blend is ground too
fine.
Try using coarser coffee blends.
The coffee blend is pressed
down too much.
amper coffee inside the filter using less pressure.
The tanks is not inserted well. Fit the tank securely by pushing it as far as it will go.
There is little water and the
pump does not suck it up.
Check that the water level in the tank is correct. If
necessary, fill it with cool tap water.
The coffee is
too watery
and cold.
The blend has been ground too
coarsely.
A more finely ground blend must be used to obtain a
more concentrated and hotter coffee.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103

Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 User Manual - Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info