Manual Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 (page 9 of 67) (English, German, Dutch, French, Swedish)

642280

Zoom out

Zoom in

1/67

GB / IE

9GB / IE

Filling the water tank during use

No special operation is necessary when the water in the tank runs out as the machine is

equipped with a special self-priming device. Just unplug the machine, pull out the tank and

fill it with fresh cool water again.

HOW TO MAKE CAPPUCCINO

To make cappuccino, hot chocolate or heat any beverage, move the steam function switch

(M) to the steam position ( ) and wait until the boiler temperature indicator lamp (L) goes

on, which indicates that the heating unit has reached the right temperature to produce steam.

When warming up, your appliance may release small puffs of steam from the filter

holder; this is perfectly normal.

Turn the steam dispensing knob (K), having the foresight to position a cup underneath the

cappuccino maker (G): at first a little water will come out, immediately followed by a strong

jet of steam.

Close the steam dispensing knob (K) to stop the jet of steam and put the pot of milk to be

whipped under the cappuccino maker (Fig. 10). Plunge the wand all the way into the pot of

milk and again open the steam dispensing knob (K) until you get the result you want. During

these operations you may notice that the boiler temperature indicator lamp (L) goes on and

off from time to time, indicating that the boiler thermostat is keeping the water required for

the steam supply at the right temperature.

It is opportune you start dispensing the steam only when the lamp is on. Dispense

the steam for a few seconds after every use in order to free the hole of any milk

residue.

Close the steam dispensing knob (K). After the cappuccino is prepared, move the steam func-

tion switch (M) to the high position to cut out the steam function.

MAKING FURTHER CUPS OF COFFEE

To prepare a cup of coffee right after making cappuccino, it is necessary to bring the boiler

back to the coffee preparation temperature by performing these operations: put the steam

function switch (M) in the high position to cool down the boiler, wait for the boiler temperature

indicator lamp (L) to turn off and then turn on again. To cool the heating unit more quickly,

proceed as follows: after having placed a container underneath the cappuccino maker (G),

put the coffee brewing switch (O) in position (

); turn the steam dispensing knob (K): this

will cause water to flow out, until the boiler temperature indicator lamp (L) turns back off.

Now close the steam dispensing knob (K) and put the coffee brewing switch (O) in the high

position. Wait until the boiler temperature indicator lamp (L) turns back on. The coffee maker

is now ready to brew coffee again.

USEFUL TIPS FOR OBTAINING A GOOD ITALIAN ESPRESSO

The ground coffee in the filter holder has to be pressed lightly. Whether the coffee is stronger

or weaker depends on the degree the coffee is ground, the quantity put into the filter holder

and the pressing. Just a few seconds are needed for the coffee to flow down into the cups. If

the dispensing time is longer, this means that the coffee is ground too fine or that the coffee

put into the filter holder has been pressed too much.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 2,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103

Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 User Manual - Italian - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SEMR 850 A1 - Typ 1388A - IAN 106103 Manual

Product: