738692
24
Zoom out
Zoom in
Previous page
1/34
Next page
22
GB
non-specialist. Repairs must be car-
ried out by a specialist workshop or
the Service Centre.
The appliance is not designed to be
operated with an external timer or a
separate telecontrol system.
WARNING about material damage
Use exclusively the stainless steel
blades supplied.
2. Items supplied
1 electric carving knife
2 stainless steel blades 7
1 protective sheath
1 set of directions for use
3. Fitting and removing
the blades
DANGER! Make sure the knife is
not plugged into the mains whilst
fitting and removing the blades 7.
Fitting the blades
1. Unplug the mains plug 4.
2. Carefully remove the stainless steel
blades 7 from the protective sheath.
When removing the stainless steel
blades 7, always hold them between
finger and thumb and only at the finger
guard 6. The teeth of the stainless
steel blades 7 should be facing down-
wards.
3.
Push the drive ends of the stainless
steel blades
7
into the insertion opening
5 in the housing until they audibly click
home.
4.
Check that the stainless steel blades
7
are securely attached.
Removing the blades
1. Unplug the mains plug 4.
2. Push the blade release button 1 to
release the stainless steel blades 7.
3. Pull the released stainless steel
blades 7 straight forwards out of the
housing. When removing the stain-
less steel blades 7, always hold them
between finger and thumb and only at
the finger guard 6. The stainless steel
blades 7 should be facing downwards.
4. Operation
DANGER! Never touch the appli-
ance with wet hands.
Always perform the carving action
away from your body, not towards your
body.
WARNING! After a maximum of 7 minutes
continuous operation, the required period
before next use is 90 minutes.
Use exclusively the stainless steel
blades 7 supplied.
Do not attempt to cut frozen foodstuffs
or bones using the knife.
Never carve foodstuffs on metallic or
ceramic surfaces. Contact with such
surfaces can damage the stainless
steel blades 7.
1. Plug the mains plug 4 into a wall
socket whose voltage matches the
particulars on the rating plate.
2. Place the foodstuffs to be carved on a
stable, flat and cut-resistant surface.
3. Press the On/Off button 2 and at the
same time press the child safety but-
ton 3.
4. Gently push the electric carving knife
into the foodstuff that is to be carved.
When carving, always move the knife
away from your body.
__RP66727 Elektromesser_B5.book Seite 22 Montag, 30. Mai 2011 9:40 09
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SEM 250 A1 IAN 66727 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEM 250 A1 IAN 66727 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SEM 250 A1 IAN 66727

Silvercrest SEM 250 A1 IAN 66727 User Manual - German, Dutch, French, Italian - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info