Manual Silvercrest SEM 1100 B3 - IAN 282260 (page 37 of 172) (English, German, Dutch, French, Portuguese, Spanish)

663304

Zoom out

Zoom in

1/172

■ 34

│

SEM 1100 B3

5) Insert the plug into a mains power socket.

6) Proceed as follows before the ﬁrst use, so as to clean the internal pipelines:

Allow suﬃcient water for about 5 cups of espresso (about 100 ml) to ﬂow

through the appliance. Refer to the section “Operation”.

7) Let the appliance generate steam for about 30 seconds. Refer to the section

“Operation”.

NOTE

► When using the appliance for the ﬁrst time, it is possible that you can hear

the pump working, even though no water comes out of the appliance. If this

is the case, turn the steam control  in the direction of the "+", so that the

air can escape from the pipes of the appliance (the "Steam" button 

is pressed). After approx. 20 seconds the air will have escaped, the noises

disappear and water ﬂows from the appliance.

Operation

NOTE

► Both the "Espresso"

 and the "Steam"  buttons engage when

pressed in. If the button is pressed again, it is released.

Filling the water tank

NOTE

► Use only fresh drinking water for making espresso/cappuccino.

1) Pull out the water tank  out and ﬁll it with water:

Fill it with water to at least the Min marking.

Never ﬁll it past the Max marking.

2) Push the water tank  back into the appliance. Ensure that the hose is inside

the water tank .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEM 1100 B3 - IAN 282260 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SEM 1100 B3 - IAN 282260 Manual

Product: