621605

Silvercrest SEM 1100 A2 - IAN 75769 Manual

70
Zoom out
Zoom in
Previous page
1/81
Next page
68
SEM 1100 A2
GB
Operation
Filling the water tank
NOTICE
► Use only fresh drinking water for making espresso/cappuccino.
1)
Pull the water tank 1 upward and out, open the lid and fi ll it with water:
Fill it with water to at least the Min. marking.
Never fi ll it with more water than up to the Max marking.
2) Push the water tank 1 back into the appliance so that it slides into the appli-
ance on the rails and sits fi rmly.
■ You can also fi ll the water tank 1 without having to r
emove it from the appli-
ance. Simply open the water tank lid and fi ll it with water from a bottle etc.
Ensure that no water runs beside the water tank 1.
Heating-up after a long standing time / on the fi rst use
If you have not used it for some time, preheat the appliance as follows:
1) Fill the water tank 1 with water.
2) Place either the large q or the small espresso sieve 0 in the sieve carrier w.
3) Insert the sieve carrier w into the appliance by placing it at the marking
“INSERT” and then turning it anticlockwise to the marking “LOCK”.
4) Place a cup under the sieve carrier w.
5) Close the steam regulation knob 2 (turn it as far as it will go in the direction
“ - “).
6) Switch the appliance on with the on/off switch 3.
7) The red heating-up control lamp i glows.
8) Turn the rotary switch 5 to the position “
”. The pump begins to pump water
into the appliance. As soon as water fl ows from the sieve carrier opening, turn
the rotary switch 5 back to the position “
”.
9) As soon as the green heating-up control lamp 4 glows, turn the rotary switch
5 to the position “
”. Allow the water to fl ow for about 1 minute. It may be
that you need to empty the cup in between. For this, briefl y stop the process.
10) After approx. 1 minute turn the rotary switch back to the position “
”.
11) Wait until the green heating-up control lamp 4 glows again. The warming-up
is concluded. You can now prepare espresso.
IB_75769_SEM1100A2_LB2.indb Abs2:68IB_75769_SEM1100A2_LB2.indb Abs2:68 24.04.12 12:4924.04.12 12:49
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SEM 1100 A2 - IAN 75769 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEM 1100 A2 - IAN 75769 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info