684689
28
Zoom out
Zoom in
Previous page
1/129
Next page
26
GB
WARNING! Risk of material
damage
~ Use the original accessories only.
~ The frying basket should always be
used when frying.
~ The device is fitted with non-slip plastic
feet. As furniture is coated with a variety
of different varnishes and acrylics, and
treated with different cleaning agents, it
cannot be completely ruled out that
components are contained in some of
these substances that could damage
and soften the plastic feet. If necessary,
place a non-slip mat under the device.
~ Splashes of fat may occur during opera-
tion. You should therefore place the de-
vice on a surface that is resistant to both
heat and grease.
~ Frying oil and fat should not be dis-
charged into drains or the toilet! The oil
or fat solidifies so that the drains may
be clogged.
~ Make sure that the surface under the de-
vice is dry.
~ Be careful when handling the grease fil-
ter. It can easily be damaged by
squeezing or cracking.
~ Never place the device on hot surfaces
(e.g. hot plates) or near to heat sources
or open fire.
~ Do not use any astringent or abrasive
cleaning agents.
4. Items supplied
1 Base unit|11 (control element|9 and heat-
ing elements|12)
1 Housing|15
1 Lid of the oil container|1 with a grease fil-
ter|22
1 Oil container|14
1 Frying basket|18
1 Handle of the frying basket|17
1 Operating instructions
5. The basics of frying
Preparation of the food
All food must be as dry as possible
when used for frying, because water
will deflagrate explosively if it comes
into contact with hot fat. Dry the food to
be fried and remove any ice from fro-
zen food.
Deep-frozen food should be partially
thawed before frying so that the food
absorbs less fat. Remove as much water
and ice as possible before you put the
food into the fryer.
Meat, fish, and vegetables should be
cut into small pieces.
In case of breaded food, please make
sure that the breading sticks as tightly as
possible to the food to be fried. Any
breading falling off the food during fry-
ing contaminates the fat.
Frying time and frying
temperature
For a tasty and healthy result, the infor-
mation on the packaging should be ob-
served very carefully when selecting the
temperature and the frying time.
Only small quantities should be fried at
a time.
The frying basket may not be filled more
than up to the MAX marking. If more
food to be fried is put into the basket,
the temperature of the fat will drop too
much, the frying process will take
longer, and more fat will be absorbed
by the food to be fried.
Acrylamide may be carcinogenic. In or-
der to reduce the formation of acryla-
mide as much as possible, both high
temperatures (of more than 170 °C) and
browning the food too much should be
avoided. With temperatures of more
than 175 °C significantly more acryla-
mide will be formed.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SEF 2300 D3 - IAN 301414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEF 2300 D3 - IAN 301414 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info