679437

Silvercrest SDW 1200 B2 - IAN 304054 Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
GB
│
IE
│
NI │ 5 ■
SDW 1200 B2
Preparing the waffle iron
Before starting to use the appliance, ensure that
the appliance, the plug and the cable are in a fault-
free condition and that all packaging materials are
removed from the appliance.
1) First of all, clean the appliance as described in
“Cleaning and Care”.
2) Briefly heat up the appliance to maximum
temperature once, keeping the lid closed.
To do this, insert the plug into the wall socket
and set the browning control 2 to level 5.
NOTE
► During first use, you may notice a slight smell
(there may also be minimal smoke). This is
normal and dissipates after a short time.
Ensure sufficient ventilation. For instance, by
opening a window.
The red LED 1 lights up whenever the mains plug
is in the socket. The green LED 1 lights up as soon
as the appliance has heated up.
3) Pull out the plug and allow the appliance to
cool down.
4) Clean the appliance again as described in
“Cleaning and Care”. The waffle iron is now
ready for use.
Making waffles
After preparing a batter suitable for waffle makers:
1) heat the appliance with the lid closed. To do
this, insert the plug into the wall socket and turn
the browning control 2 to level 3. The further
you turn the browning control 2 to the right,
the darker the waffles will be baked.
NOTE
► If you are using a low-fat batter such as quark
batter, lightly grease the baking surfaces with
a type of margarine or oil suitable for baking.
When the green LED 1 lights up, the appliance
has heated up.
2) Spread the batter evenly on the lower baking
tray. To determine the right amount of batter for
your waffle, pour the batter on the baking sur-
faces until it just touches the edge. If necessary,
increase or reduce the amount of batter when
you cook the next batch of waffles. Make sure
that the batter does not run over the edge of
the baking trays.
Now close the lid.
3) After no less than 2 minutes, you can open the
lid to check the progress. Opening the lid any
earlier will rip the waffle.
The waffles are ready after about 3 minutes.
NOTE
► As the ideal browning level depends on
personal taste and the type of batter, baking
times can vary: bake the waffles until they have
reached your preferred level of browning.
You can control the level of browning by ad-
justing the browning control 2 or the baking
time. This allows you to bake golden to crispy
brown waffles.
Be careful not to damage the non-stick coating on
the baking surfaces when you remove the waffles.
Otherwise, the waffles will be more difficult to
remove in the future.
NOTE
► You do not need to re-grease the baking
surfaces before every new waffle.
4) After cooking the last waffle, remove the plug
from the power socket and allow the device to
cool down completely.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDW 1200 B2 - IAN 304054 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDW 1200 B2 - IAN 304054 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDW 1200 B2 - IAN 304054

Silvercrest SDW 1200 B2 - IAN 304054 User Manual - German, Dutch, Danish, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info