Manual Silvercrest SDRB 1000 B1 - IAN 290638 (page 46 of 64) (Italian, Portuguese, Spanish)

679075

Zoom out

Zoom in

1/64

SDRB 1000 B1

GB│MT │ 43 ■

CAUTION

►

Always remove the plug  from the power

socket before ﬁlling the appliance! There is a

risk of electric shock!

♦ Remove the water tank  by sliding back the

release of the water tank until you can

lift the water tank up. Grip the water tank 

by the protruding gripping aids with your thumb

and index ﬁnger and lift it up vertically. The tem-

perature control  stays on the appliance and

is not removed along with the water tank.

♦ Open the ﬁller opening  in the water tank .

♦ Use the measuring cup 0 to ﬁll the water tank 

with water to the “Max” marking.

♦ Close the ﬁller opening  in the water tank .

Ensure that the collar in the ﬁller opening 

locks into the notch on the lid. This means that

the water tank  is properly closed.

♦ Replace the water tank  onto the appliance.

The water tank  must audibly click into the

release of the water tank.

Attaching/removing the brush

extension

CAUTION

► Never remove or attach the brush extension 3

while the appliance is hot.

Risk of burns!

♦ To use the steam and brush functions, please at-

tach the brush extension 3to the steam brush.

♦ To do this, push the brush extension 3onto

the appliance along the guide aid until it is fully

attached. The release of the brush extension -

must click into place audibly.

♦ To use the ironing function, please remove the

brush extension 3 from the steam brush.

♦ To do this, push the release -downwards and

pull the brush extension 3 oﬀ the appliance.

Steam brush function

♦ Attach the brush extension 3 to the appliance.

It must audibly click into the release of the brush

extension -.

♦ Insert the plug  into a properly installed and

grounded wall socket.

♦ To produce steam, set the temperature control 

UPtttPSIJHIFS5IFIFBUVQJOEJDBUPSMBNQ

lights up. As soon as the selected temperature

has been reached, the heat-up indicator lamp 

goes out.

NOTE

► To use the steam burst function, set the tem-

perature control UPtttPSIJHIFS

Lower temperatures are insuﬃcient for pro-

ducing a burst of steam.

♦ You can now produce a burst of steam by press-

ing the steam burst button .

NOTE

► To produce the ﬁrst burst of steam after heat-

ing the appliance, you may have to press the

steam burst button  several times in a row.

The appliance is now ready for use.

CAUTION

► The steam brush can be used with any piece

of clothing. Be careful when treating heat-

sensitive textiles such as synthetics, polyamide

or artiﬁcial silk. Before treating such materials,

ﬁrst process a small test patch in an invisible

spot (inside of the seam) to ensure that the hot

steam does not damage the material. Do not

apply the hot ironing sole  to these materi-

als directly. Only use the steam burst function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDRB 1000 B1 - IAN 290638 in the language / languages: Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDRB 1000 B1 - IAN 290638

Silvercrest SDRB 1000 B1 - IAN 290638 User Manual - English, German - 40 pages

Silvercrest SDRB 1000 B1 - IAN 290638 User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDRB 1000 B1 - IAN 290638 Manual

Product: