Manual Silvercrest SDRB 1000 A1 (page 12 of 81) (English, German, Dutch, Danish, French, Swedish, Finnish)

558491

Zoom out

Zoom in

1/81

- 9 -

Ironing function

• Dismantle the brush attachment w from the

appliance (see “Attaching/detaching the brush

attachment”).

• Connect the appliance to a correctly installed

and earthed mains power socket.

• Adjust the temperature regulator 3 as per the

international point symbols (Care Label) or the

type of material. The heating-up control lamp 5

glows. As soon as the set temperature has been re-

ached, the heating-up control lamp 5 goes out .

Note:

If doubt exists, start with a low temperature and

gradually increase it to a higher one. With sensitive

materials we recommend carrying out an ironing

test at a concealed part (inside seam).

• For heavily creased laundry, you can use the steam

function by pressing the steam blast button 8. To

generate the steam, the temperature regula-tor 3

must be set to at least ••• or higher.

• Should the heating-up control lamp 5 glow during

the process, release the steam blast button 8

and wait for a few moments until the heating-up

control lamp 5 extinguishes.

Washing label Type of

material

Temperature

regulator 3

Chemical fibres,

e.g. viscose,

polyester

•

(low

temperature)

Silk, Wool

••

(medium

temperature)

Cotton, Linen

•••

(high

temperature)

• You can repeatedly press the steam blast button 8

until the heating-up control lamp 5 glows or

water drips from the sole of the iron 0. Then,

wait until the heating-up control lamp 5 extin-

guishes before activating a further blast of

steam.

Note:

Should you press the steam blast button 8 whilst

the heating-up control lamp 5 is glowing the result

will be condensed water instead of steam, and water

will drip from the sole of the iron 0.

Should the water tank 1 become empty while the

appliance is in use, remove the plug 7 from the

power socket before refilling it.

• If you want to put the appliance down during

use, fold out the stands 9 to the front and place

the appliance on them. When you are ready to reu-

se the appliance, simply fold the stands 9 back

to the rear.

After using the steam brush

• Place the temperature regulator 3 at the position

"MIN".

• After use, ALWAYS remove the plug 7 from the

power socket.

• Pour away any water remaining in the water

tank 1 to do this, open, the water fill opening 2

of the water tank 1, turn the appliance upside

down and lightly swivel it.

IB_93147_SDRB1000A1_FI_SE_DK_BE.qxp 07.08.2013 11:12 Uhr Seite 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDRB 1000 A1 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDRB 1000 A1 Manual

Product: