Manual Silvercrest SDRB 1000 A1 - IAN 93147 (page 11 of 81) (English, German, Dutch, Danish, French, Swedish, Finnish)

576765

Zoom out

Zoom in

1/81

- 8 -

Note:

For the steam blast function, set the temperature

regulator 3 to at least •••. At lower settings the

temperature is not sufficient to generate a steam blast.

• By pressing the steam blast button 8 you can

now produce jets of steam.

Note:

To release the first steam blast after heating the appli-

ance up, it can happen that you may need to press

the steam blast button 8 several times in succession.

The appliance is now ready for use.

Attention!

The steam brush can be used with all clothing items.

Caution is to be exercised with heat-sensitive materials

such as synthetics, polyamides or artificial silk. With

these materials you should first check at a concealed

part (inside seam) that the hot steam will not cause

any damage to the garment. Do not touch these ma-

terials directly with the hot sole of the iron 0. Use

only the steam blast.

Clothing care

• Suspend the crumpled garment from a coat hanger.

• With one hand pull the garment flat, then steam it

from top to bottom. The combination of steam and

clothes brush r will gently remove all creases.

• Use light pressure with the clothes brush r and

guide the appliance from top to bottom over the

garment. You can thereby press the steam blast

button 8 in short intervals.

Note:

You can repeatedly press the steam blast button 8

until the heating-up control lamp 5 glows or water

drips from the sole of the iron 0.

Then, wait until the heating-up control lamp 5 extin-

guishes before activating a further blast of steam.

• If the heating-up control lamp 5 lights up during

operation, do not press the steam blast button 8.

Wait a few seconds until the heating-up control

lamp 5 goes out before pressing the steam

blast button 8 again.

Note:

Should you press the steam blast button 8 whilst

the heating-up control lamp 5 is glowing the result

will be condensed water instead of steam, and water

will drip from the sole of the iron 0.

• Leave the garment on the clothes hanger to cool

down before putting it on.

Curtain and soft furnishing care

• Creases and wrinkles can be removed from

draperies by hanging them over a pole.

• Then simply follow the directions given under

“Clothing care”.

• Always carry out a test first at a concealed part.

• If you are using the appliance horizontally, every

now and then hold it upright so as to have the

maximum steam performance.

Fluff brush

• Threads, fluff and hairs can be easily removed

with the red fluff brush e by slowly brushing

over the garment with it from left to right.

• You can clean the fluff brush e by brushing with

it in the opposite direction (from right to left)

over, for example, a remnant of material.

IB_93147_SDRB1000A1_FI_SE_DK_BE.qxp 07.08.2013 11:12 Uhr Seite 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDRB 1000 A1 - IAN 93147 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDRB 1000 A1 - IAN 93147 Manual

Product: