739947
49
Zoom out
Zoom in
Previous page
1/64
Next page
IT
GB
47GB
nozzle (2) in the wand nozzle (1).
N.B.: The nozzle can also be used with the extension tubes, with the special attachment.
Nozzle attachment (4)
The nozzle attachment (4) is fixed to the extension tube so as to connect other attachments to
the tube and make it easier to clean points that are hard to reach (e.g. due to height).
Multipurpose brush (5)
The multipurpose brush can be connected directly to the gun (C) or to the extension tubes,
using the nozzle attachment (4). Using the cover provided (14), which needs to be attached
to the multipurpose brush (5), the brush can be used to remove dust from sofas, armchairs,
throws, mattresses and cushions or pillows. In any case, it is advisable to make sure that the
condensation from the steam flows into the container before and during use, to prevent the
fabric from becoming wet.
Window wiper (6)
It is possible to fit the window wiper (6) to the multipurpose brush (5): position the brush
diagonally on the window wiper so that the rear slots hook onto the tabs and then press the
brush forwards until the window wiper locks into place. The window wiper is used to polish
windows, mirrors and polished surfaces. It is also simple to use in shower cubicles to remove
the build up of scale deposits.
Floor brush (8) with special joint to floor brush attachment (7)
Fit the floor brush (8) to the extension tubes (9) using the relevant attachment (7) . It is advis-
able first to fit the floor brush to the attachment, then the floor cloth to the brush and finally,
to fit the attachment to the extension tube. The floor brush has handy hooks to which it is
possible to fit any type of machine-washable floor cloth, as well as the cloth provided (13).
To secure the cloth, place the brush on it and then tuck the cloth sides into the brush.
Extension tubes (9)
The extension tubes are inserted into one another. To separate them, use the release button.
The extension tubes are used with the floor brush and the proper attachment (7); they also
make it easier to use when cleaning points that are difficult to reach, when fitted with the
nozzle attachment (4) and the proper attachment.
Attachment bag (10)
The appliance is provided with a practical bag for attachments, keeping them within easy
reach at all times.
FILLING THE BOILER TANK DURING USE
If water should leak out of the boiler tank during use, switch off the appliance from the On/
Off switch (G), unplug it from the mains and proceed as follows:
Press the steam button (A) to discharge any remaining steam;•
Slowly loosen the safety cap (I) and wait a few seconds until the whistling of the steam •
can no longer be heard. Empty the boiler tank completely and wait a few minutes before
refilling the boiler tank;
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDR-1500A1 IAN 86549 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDR-1500A1 IAN 86549 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info