612083

Silvercrest SDG 800 B2 - IAN 42772 Manual

17
Zoom out
Zoom in
Previous page
1/126
Next page
SDG 800 B2 15
10. Cleaning and storing
Warning! To prevent the risk of an
electric shock, injury or damage:
– disconnect the power supply
from the socket before any
cleaning step;
– allow the appliance to cool
down before cleaning it;
– never immerse bottom part 12 in
water.
Caution! Under no circumstances use
scouring agents or corrosive or abrasive
cleaning materials, as these could damage
the appliance.
10.1 Dismantling the appliance
1. Disconnect the power supply from the
socket.
2. Take off steamer baskets 5 .
3. Carefully push the perforated bases out
of the steamer baskets.
4. Take off collector 7.
5. Take steam sleeve 8 out of collector 7.
10.2 Cleaning the bottom part
1. Clean bottom part 12 with a damp
cloth. A little washing-up liquid may also
be used.
2. Wipe off with clean water.
3. Do not use the appliance again until it is
completely dry.
10.3 Cleaning the accessories
Wash plastic accessories by hand in the
sink.
10.4 Assembling the accessories
1. Put the bases back in steamer baskets 5:
– insert the bases so that the small
depressions for eggs are pointing
downwards;
– the lugs in the steamer baskets must fit
precisely in the corresponding
openings in the bases;
– push the bases into the steamer
baskets until they engage audibly.
2. Put steam sleeve 8 on steam
generator 11. The narrow end of steam
sleeve 8 must face upwards.
10.5 Storing the appliance
The steamer baskets 5 of different sizes can
be stacked inside one another to prevent the
appliance being too tall when stored in a
cupboard.
1. Wind the power cord around
underneath bottom part 12.
2. Put collector 7 in bottom part 12.
3. Put steamer basket no. 1 in no. 2 and
then both in steamer basket no. 3.
4. Put rice tray 4 in steamer baskets 5.
5. Put on lid 3 .
6. Put the steamer baskets on bottom
part 12.
7. Put the appliance away.
10.6 Descaling the appliance
Depending on the hardness of your water,
limescale may build up in the appliance.
You should remove this regularly to save
energy, increase the service life of the
appliance and for hygiene reasons.
RP42772-Dampfgarer LB4 Seite 15 Dienstag, 8. Oktober 2013 6:34 18
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDG 800 B2 - IAN 42772 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDG 800 B2 - IAN 42772 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDG 800 B2 - IAN 42772

Silvercrest SDG 800 B2 - IAN 42772 User Manual - English, German, Dutch, French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info