679072

Silvercrest SDBS 2800 A1 - IAN 285972 Manual

24
Zoom out
Zoom in
Previous page
1/88
Next page
SDBS 2800 A1
GB│IE │ 21 ■
Automatic switch-off
This steam iron is fitted with an automatic switch-off
system. This stops the iron from heating up.
If the iron is resting on its sole - and is not moved
for about 30 seconds, there will be a warning
beep and the AUTO OFF control lamp flashes.
The iron will stop heating up. To deactivate the au-
tomatic switch-off, lift up the iron and move it gently
from side to side. The AUTO OFF control lamp
goes out and the iron will heat up again.
If the iron is on its base and is not moved for
about 1 minute, there will be a warning beep and
the AUTO OFF control lamp flashes. The iron
will stop heating up. To deactivate the automatic
switch-off, lift up the iron and move it gently from
side to side. The AUTO OFF control lamp goes
out and the iron will heat up again.
NOTE
The automatic switch-off is not intended as a
substitute for removing the plug from the mains
power! This is merely intended to reduce the fire
hazard if you forget to switch off the iron!
Cleaning
Self-cleaning function
■ Fill the water tank to the "MAX" marking.
■ Insert the plug into the mains power socket.
■ Move the temperature control to the "MAX"
position.
■ Use the steam quantity button to select steam
level 3.
■ Allow the steam iron to heat up until the control
lamp "LINEN" lights up permanently.
■ Hold the steam iron horizontally over a suitable
container.
NOTE
If your hands are sensitive to heat, wear oven
gloves. Hot steam escapes during cleaning.
■ Press the self-clean button 3 and keep it
pressed. Move the steam iron back and forth a
little.
Steam and boiling water will flow from the
steam exit holes in the sole of the iron -. Any
impurities and limescale that may be present are
flushed out.
■ Release the self-clean button 3 as soon as all
of the water in the water tank is used up.
■ Dry the sole of the iron - thoroughly. To do
this, move the sole of the iron - back and forth
several times over a towel or an old piece of
material.
■ Allow the steam iron to cool down before putting
it away.
Housing and sole of the iron
MORTAL DANGER!
► Always remove the plug before cleaning the
appliance. There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before
cleaning it. Otherwise, there is a risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not use aggressive, abrasive or chemi-
cal cleaning agents. They can damage the
surface and also lead to irreparable damage
to the appliance.
■ Clean the housing with a soft, dry cloth only.
■ Clean the sole of the iron - using a damp cloth
and a mild, non-scouring detergent.
■ Dry the appliance well before using it again.
Storage
Store the cooled-down appliance in a clean, dust-
free and dry location.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBS 2800 A1 - IAN 285972 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBS 2800 A1 - IAN 285972 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info