618614
17
Zoom out
Zoom in
Previous page
1/125
Next page
14
SDBS2200A1
GB
IE
Steam ironing
Press the on/off button to switch on the appliance. The indicator in the
On/off button
and the “Iron dry” indicator light up.
Press the boiler button
to activate steam ironing mode. The indicator in
the boiler button
lights up, and the “Iron dry” indicator goes out.
NOTE
The boiler is located in the bottom of the appliance and is automatically supplied
with water from the water tank
by means of a pump. During heating up
and refi lling the boiler, the pump switches on for a few seconds. This causes a
humming noise and you will feel the appliance vibrate. This is normal and is
not a reason for complaints.
After a few minutes, the “Steam ready” indicator lights up.
Turn the temperature control
to set the desired ironing temperature.
NOTE
For steam ironing you must set at least the medium temperature ● ● on the
temperature control
.
The temperature indicator
lights up while the appliance is heating up.
As soon as the temperature indicator goes out, the set temperature has
been reached and you can start steam ironing.
Set the steam control
to the desired steam setting. Turn the control
clockwise to increase the amount of steam. Turn it in the opposite direction
to reduce the amount of steam.
If the iron
is fi xed to the base station using the catch , push the
catch release into the position. Now you can remove the iron
from the base station .
While ironing, you can press the steam blast button
to give a continuing
blast of steam from the soleplate onto the clothes. Press the Steam stop
button to stop the steam output.
NOTE
If you only want a short steam blast, press the Steam stop button
briefl y
and then release it. The steam only comes out of the soleplate as long as
you hold down the button and stops when you release it.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBS 2200 A1 - IAN 96145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBS 2200 A1 - IAN 96145 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info