576764

Silvercrest SDBK 2200 B2 - IAN 93145 Manual

18
Zoom out
Zoom in
Previous page
1/23
Next page
- 15 -
• This appliance may be used by children aged 8 years or more and by persons
with reduced physical, sensory or mental capabilities or lack of experience
and/or knowledge if they are supervised, or have been instructed in the safe
use of the appliance and have understood the potential risks. Children must not
play with the appliance. Cleaning and user maintenance must not be carried
out by children unless they are supervised.
Attention!
• Should the clothing care instructions forbid iro-
ning, (Symbol ), the clothing item may not be
ironed. If you do so, the clothing item could be
permanently damaged.
• The water tank is to be filled exclusively with
mains or distilled water. You will otherwise da-
mage the steam iron.
• You may not clean the steam iron with solvents,
alcohol or abrasive cleaning agents. These
could damage it.
Before the First Use
• Remove the steam iron from the packaging.
• Remove all protective coverings and protective
foils from the steam iron and from the ironing
sole e.
Risk of asphyxiation!
Plastic bags can be dangerous. To avoid the risks of
asphyxiation, keep plastic bags out of the reach of
toddlers and small children.
• Pour water into the water tank (see chapter
"Filling the water tank").
• Connect the steam iron with the cable base 8
and with the station q (see chapter "Instructions
for Use").
• Insert the plug into a wall power socket supply-
ing an electrical current as detailed on the rating
plate.
• Place the temperature regulator 7 into the posi-
tion "MAX".
To set the temperature, turn the outer ring of the
temperature regulator 7.
The setting which can be seen in the cut-out is the
set temperature.
• Heat the steam iron up for several minutes at this
highest setting.
• Remove the steam iron from the station q
(see chapter “Tips for utilisation”).
• Press the button for the steam blast 5 a few ti-
mes such that steam exits from the ironing sole e.
• Then iron a piece of material that is no longer
required, to remove possible contamination from
the ironing sole e.
Tips for utilisation
In addition to the typical utilisation with a cable,
you can also separate the steam iron from the cable
base 8 for a short period to iron textiles which are
not located close to an electrical power socket.
To separate the steam iron from the cable base 8:
• Place the steam iron, with the cable base 8
engaged, onto the station q. The unlocking
switch 0 must be in the position .
IB_93145_SDBK2200B2_LB1.qxp 27.11.2013 12:20 Uhr Seite 15
… 18 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sdbk-2200-b2---ian-93145

Reset search

  • Silvercrest SDB22001 B1 how do you tear down this iron to replace cable Submitted on 27-4-2022 at 14:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBK 2200 B2 - IAN 93145 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBK 2200 B2 - IAN 93145 in the language / languages: English, German as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info