796222

Silvercrest SDBB 2400 A1 - IAN 390790 Manual

14
Zoom out
Zoom in
Previous page
1/222
Next page
SDBB 2400 A1 GB│IE │ 11 ■
After use
1) Set the temperature control 6 to the min setting.
2) Remove the plug from the mains power socket.
3) Stand the steam iron on its base 9 and allow it to cool down completely.
4) Empty the water tank via the filling opening 2 and clean the soleplate 0
(see section Cleaning the housing and soleplate).
5) Place the steam iron back on its base 9.
Automatic switch-off
This steam iron is fitted with an automatic switch-off system. This stops the steam
iron from heating up if it is not moved within a certain amount of time:
■ If the iron is resting on its soleplate 0 and is not moved for about 30 sec-
onds, you will hear a warning beep and the control lamp for the automatic
switch-off 7 starts flashing. The steam iron will automatically stop heating
up. To deactivate the automatic switch-off, lift up the steam iron and move it
gently from side to side. The steam iron will heat up again.
■ If the iron is on its base 9 and is not moved for about 8 minutes, you will
hear a warning beep and the control lamp for the automatic switch-off 7
starts flashing. The steam iron will automatically stop heating up. To deacti-
vate the automatic switch-off, lift up the steam iron and move it gently from
side to side. The steam iron will heat up again.
NOTE
► The automatic switch-off is not intended as a substitute for removing the
plug from the mains power! It is merely intended to reduce the fire hazard if
you forget to switch off the steam iron.
Anti-drip system
The steam iron has an anti-drip system that automatically switches off the steam
blast at low temperatures. If this happens, you will hear a click. You must then set
a suitable temperature with the temperature control 6. As soon as this tempera-
ture is reached, steam production is resumed.
NOTE
► Wait until the set temperature has been reached and the control lamp 7
lights up before pressing the steam blast button 4 again. Otherwise,
water may drip from the soleplate 0.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDBB 2400 A1 - IAN 390790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDBB 2400 A1 - IAN 390790 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info