Manual Silvercrest SDB 2400 E3 - IAN 279179 (page 8 of 83) (English, German, Dutch, Danish, French)

656664

Zoom out

Zoom in

1/83

~ If the device nevertheless falls into wa-

ter, pull out the power plug immediately

and only then remove the device from

the water. Do not use the device again,

and have it checked by a specialist.

~ The water tank must not be filled with

water above the max marking, other-

wise it may overflow.

~ Never touch the device with wet hands.

DANGER! Risk of electric

shock

~ Lay the power cable such that no one

can step on it, get caught on it, or trip

over it.

~ Only connect the mains plug to a prop-

erly installed and easily accessible wall

socket whose voltage corresponds to

the specifications on the rating plate.

The wall socket must continue to be eas-

ily accessible after the device is

plugged in.

~ Ensure that the power cable cannot be

damaged by sharp edges or hot points.

Do not wrap the power cable around

the device (risk of cable damage!).

~ Ensure that the power cable cannot be

trapped or crushed.

~ To pull the mains plug out of the wall

socket, always pull on the mains plug,

and never on the power cable.

~ Disconnect the mains plug from the wall

socket…

… after every use

… if there is a fault,

… when you are not using the device,

… before you clean the device, and

… during thunderstorms.

~ If the power cable or the device is dam-

aged, immediately pull the mains plug

out of the wall socket.

DANGER! Fire hazard!

~ Use the device on a stable, level and

heat-resistant surface.

~ Even during short interruptions, always

place the steam iron on the base unit

and never on its sole plate. It must be

placed on a stable and heat-resistant

surface. Pull out the mains plug during

longer interruptions or if you leave the

room.

DANGER! Risk of injury

through burning!

~ Do not touch the hot surfaces of the de-

vice.

~ Allow the device to cool down com-

pletely before you clean it or put it

away.

~ Danger due to sudden evaporation. Al-

low the device to cool down completely

before you refill it with fresh water.

~ Warning: risk of burns from steam and

sprayed hot water when using the

steam burst button. When using the

steam burst, always point the sole plate

towards the item of laundry or ironing

board.

~ The sole plate becomes very hot during

operation. Only touch the handle and

control elements of the steam iron dur-

ing operation.

Never iron items of clothing on a per-

son's body.

WARNING! Risk of material damage

~ Only use the original accessories.

~ Do not use any astringent or abrasive

cleaning agents.

~ Do not iron over e.g. zippers, metal but-

tons or applications that could damage

the sole plate.

~ Do not put vinegar, limescale remover

or any other additives into the water

tank. Additives can damage the device.

BB1$6B%XHJHOHLVHQB%ERRN6HLWH)UHLWDJ2NWREHU

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 E3 - IAN 279179 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDB 2400 E3 - IAN 279179 Manual

Product: