679076

Silvercrest SDB 2400 B2 - IAN 291815 Manual

9
Zoom out
Zoom in
Previous page
1/45
Next page
SDB 2400 B2
■ 6 │ GB
│
IE
│
NI
│
CY
Before first use
1) Remove the steam iron from the packaging.
2) Remove all stickers and protective films from
the steam iron and from the sole of the iron 9.
WARNING – RISK OF
SUFFOCATION!
Plastic bags can be dangerous. To avoid the
risks of asphyxiation, keep plastic bags out of
the reach of babies and toddlers.
3) Fill the water tank with water (See the chapter
“Filling the water tank”).
4) Insert the plug into a mains power socket sup-
plying an electrical current as detailed on the
rating plate.
5) To switch on the iron and set the temperature,
press the TEMP
3 button repeatedly until
11/MAX appears on the display 1.
6) Heat the steam iron up for several minutes at
the highest setting.
7) Activate the steam blast button 5 several times
so that steam comes out of the sole of the iron 9.
8) Then iron over a piece of scrap fabric to re-
move any production residues that may remain
on the sole of the iron 9.
9) Press the
TEMP 2 button repeatedly until
the display 1 reads Standby in red letters.
10) Remove the power plug from the mains power
socket.
Automatic switch-off
This steam iron is fitted with an automatic switch-off
system. This stops the steam iron from heating up.
When the steam iron is resting on its sole 9 and
is not moved for approx. 30 seconds, 6 warning
beeps will sound while “PAUSE” appears in red in
the display 1. The steam iron will stop heating up.
To deactivate the automatic switch-off, lift up the
steam iron and move it gently from side to side.
The previously set temperature level is shown again
in white and the steam iron heats up again.
When the steam iron is resting on its base 7 and
is not moved for approx. 8 seconds, 6 warning
beeps will sound while “PAUSE” appears in red in
the display 1. The steam iron will stop heating up.
To deactivate the automatic switch-off, lift up the
steam iron and move it gently from side to side.
The previously set temperature level is shown again
in white and the steam iron heats up again.
NOTE
The automatic switch-off is not intended as a
substitute for removing the plug from the mains
power!
It is merely designed to prevent the appliance
from overheating and helps to avoid unneces-
sary power consumption.
It does not provide fire protection, however, e.g.
if you place and leave the hot steam iron on
flammable material.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 2400 B2 - IAN 291815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 B2 - IAN 291815 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDB 2400 B2 - IAN 291815

Silvercrest SDB 2400 B2 - IAN 291815 User Manual - German, Dutch, Danish, French - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info