679069

Silvercrest SDB 2400 B2 - IAN 278168 Manual

12
Zoom out
Zoom in
Previous page
1/60
Next page
SDB 2400 B2
GB
│
IE
│
NI │ 9 ■
– Make sure you do not turn the steam control 8
further than the
setting. Otherwise, you
will activate the self-cleaning function (see
chapter "Self-cleaning function").
■ As soon as you hold the steam iron horizontally,
steam will come out of the sole of the iron 9.
■ If you set the steam regulator 8 to or hold
the steam iron vertically, no steam will come out
of the sole of the iron 9.
Ironing with steam blast
The steam blast function is especially suitable for
smoothing diffi cult-to-reach parts of a garment.
1) Raise the steam iron slightly.
2) Press the steam blast button 5 for a blast of
steam.
You can also use the steam blast function to smooth
hanging textiles.
Hold the iron vertically and press the
steam blast button 5.
Pausing operation of the steam iron
CAUTION – RISK OF FIRE!
Never leave a hot steam iron unattended if it is
switched on or connected to the mains power
supply.
1) To switch off the steam iron, press and hold the
TEMP
3 button or the TEMP 2 button
until you hear a beep and the display 1 reads
"Standby" in red letters.
Or:
2) Press the
TEMP 2 button repeatedly until
you hear a beep and the display 1 reads
"Standby" in red letters.
Switching the steam iron off
1) Remove the power plug from the mains power
socket.
2) Empty the water tank and clean the sole of the
iron 9.
3) Place the cooled-down steam iron on the base 7.
Anti-drip system
With conventional steam irons, water can drip
from the sole of the iron 9 if the set temperature
is too low. This steam iron, however, is equipped
with a special anti-drip system (
). At low
temperatures, the steam iron automatically switches
off the steam blast function. When this happens,
a "click" can be heard. Set a suitable temperature
level. As soon as this is reached, steam production
is resumed.
Cleaning
Self-cleaning function
1) Fill the water tank to the marking MAX.
2) Insert the plug into the mains power socket.
3) To switch on the iron and set the temperature,
press the TEMP
3 button repeatedly until
11/MAX appears on the display 1.
4) Turn the steam control 8 to "SELFCLEAN" and
keep it in this position. For safety reasons, the
steam control 8 does not snap into this posi-
tion, as this would cause water to drip from the
sole of the iron 9 continuously.
5) Hold the steam iron horizontally over a suitable
container.
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-sdb-2400-b2---ian-278168

Reset search

  • What setting do I put my arm out to Get it to steam Submitted on 28-8-2021 at 23:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 2400 B2 - IAN 278168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 B2 - IAN 278168 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info