Manual Silvercrest SDB 2400 A1 - IAN 66493 (page 69 of 92) (English, Italian, Portuguese, Spanish)

679066

Zoom out

Zoom in

1/92

SDB 2400 A1

Drip-Stop Function

With conventional steam irons it can happen that water drips from the iron sole

at low temperatures. This iron however possesses a new feature characteristic,

the DRIP-STOP function:

The iron automatically cuts oﬀ the supply of water for steam generation (for

steam blast and steam ironing) at low temperatures.

When this happens, a “CLICK” is to be heard. Thus, no water can drip from the

soleplate 9. You must then re-set a suitable temperature with the temperature

regulator 7. As soon as this is reached, steam production is continued.

Also when you put the steam iron down or simply let it cool down, the DRIP-STOP

function prevents dripping from the soleplate 9.

Cleaning

Self-cleaning function

NOTICE

We recommend carrying out the self-cleaning every 2 weeks. If the water ►

in your area is very hard, you should carry out the self cleaning more

frequently.

Check to ensure that the plug has been disconnected fr

om the mains power 1)

socket.

Adjust the steam regulator to the position 2)

Fill the water tank to the marking MAX.3)

Insert the plug into a mains power socket.4)

Set the temperature regulator 5) 7 to the position MAX and let the iron heat up

until the control lamp "Temperature" 4 goes out.

Disconnect the plug from the mains power socket.6)

Hold the iron with one hand horizontally over a collecting bowl.7)

With the other hand press and hold the button Self Clean 8) 8. Move the

iron gently back and forth. Thereby, steam and boiling water ﬂ ows from the

steam exit holes in the sole of the iron 9. Impurities that may be present are

washed out.

Release the Self Clean 9) 8 button after about 5 - 10 seconds.

Clean the soleplate 10) 9. To do this, pass the sole plate 9 a few times back

and forth over a towel or piece of old cloth.

Allow the steam iron to cool down before putting it to one side.11)

Hello great minds ,Please I have an issue with my Silvercrest SDB 2400 A1 - IAN 66493 iron, I filled it with water so as to use while pressing my clothes, it works for a while all of a sudden it stop heating, just showing the indicator light then beeping Submitted on 29-3-2022 at 08:34
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 A1 - IAN 66493 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDB 2400 A1 - IAN 66493

Silvercrest SDB 2400 A1 - IAN 66493 User Manual - English, Italian, Portuguese, Spanish - 62 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDB 2400 A1 - IAN 66493 Manual

Product: