645208

Silvercrest SDB 2400 A1 - IAN 270676 Manual

11
Zoom out
Zoom in
Previous page
1/51
Next page
8
SDB 2400 A1
GB
IE
2) Check the care instructions on the labels in
garments to see if they are suitable for being
ironed, and at which temperature setting.
3) To switch on the iron, press the TEMP
button - repeatedly until the required tem-
perature level appears on the display (see
chapter “Meaning of the display indicators”).
Use the
TEMP button to change to a
higher or lower temperature level.
As soon as the indicator for the material type stops
flashing on the display and a beep is heard, the
set temperature has been reached and you can
begin ironing.
NOTE
If you are ironing very dry and creased fabrics,
you can dampen the material using the spray
function. To dampen the material, press the
button for the spray function .
Steam ironing
NOTE
The temperature level must be set to at least level
6. Otherwise no steam can be produced.
■ Set the steam regulator to the desired steam
setting. As soon as you hold the steam iron
horizontally, steam will discharge from the sole
of the iron.
■ If you set the steam regulator to
or hold
the steam iron vertically no steam will come out
of the sole of the iron.
Ironing with steam blast
The steam blast function is especially suitable for
smoothing difficult-to-reach parts of a garment.
1) Slightly raise the steam iron.
2) Press the steam blast button for a blast of
steam.
You can also use the steam blast function to smooth
hanging textiles.
Hold the iron vertically and press the
steam blast button .
Temporarily setting the steam iron
down
CAUTION – RISK OF FIRE!
Never leave a hot steam iron unattended if it is
switched on or connected to the mains power
supply.
1) To switch off the steam iron, press and hold the
TEMP
button - or the TEMP button
until you hear a beep and the display lights
up red and indicates OFF.
Or:
2) Press the
TEMP button repeatedly until
you hear a beep and display lights up red
and indicates OFF.
Taking the steam iron out of service
1) Remove the plug from the mains power socket.
2) Empty the water tank and clean the sole of
the iron.
3) Place the cooled-down steam iron on the
base .
Anti-drip system
With conventional steam irons it can happen that
water drips from the iron sole at low temperatures.
This steam iron, however, is equipped with a special
anti-drip system. At low temperatures the steam iron
automatically switches off the steam blast function.
When this happens, a “click” can be be heard.
Set a suitable temperature level. As soon as this is
reached, steam production is resumed.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 2400 A1 - IAN 270676 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 A1 - IAN 270676 in the language / languages: English, German, Dutch, Français as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDB 2400 A1 - IAN 270676

Silvercrest SDB 2400 A1 - IAN 270676 User Manual - English, German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info